Little help in Brisbane!

maxgus · Postby **maxgus** » Fri Dec 05, 2014 3:05 pm

Hey guys I am having a misfire issue. I would appreciate it if anyone in Brisbane would have a spare cam angle sensor I could borrow for a fault finding session and possibly for sale if that's the issue. Any help would be awesome.

Thanks
Angus

slyfox2151 · Postby **slyfox2151** » Fri Dec 05, 2014 6:10 pm

I have a "dodgee" cam angle sensor for the SVT engine. I don't know if it will fit yours or not.

It works fine until it gets hot.

Regie · Postby **Regie** » Fri Dec 05, 2014 9:25 pm

when it starts ti misfire, pour some cold water on the CAS and take it for a drive. That will diagnose if its faulty or not

maxgus · Postby **maxgus** » Fri Dec 05, 2014 11:18 pm

Thx slyfox I have already organised a loan. Regie might not be CAS as it's also hunting for idle from cold start before it gets hot and sometimes it's a very intermittent misfire. Could also be a sh*t batch of fuel as I filled up before the issue started. I have already changed a coil pack out so pretty sure it's not spark. Leads are ok and plugs are pretty new. Have to start throwing parts at it till I find the issue.

maxgus · Postby **maxgus** » Tue Dec 09, 2014 2:54 pm

After changing a whole bunch of stuff I'm nearly 100% sure it was a leak in the intake manifold! Problem fixed and ok so far. Thanks for all the help.