running on 3 cyls when cold.

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

4sfed5
Fast Driver
Posts: 307
Joined: Tue Jul 05, 2005 5:13 pm
Vehicle: NA6 - Turbo
Location: New Zealand
Contact:

running on 3 cyls when cold.

Postby 4sfed5 » Tue Sep 30, 2014 7:23 pm

My 1990 na6 runs like a bucket of bolts on cold start up. basically feels like its running on 3 cyls. after about a minute or so its fine and purr like a kitten if seemingly a little rich. the car is turbo and running an emanate blue . but data logs are fine.
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6

User avatar
bartmanftw
Fast Driver
Posts: 451
Joined: Wed Oct 30, 2013 1:35 pm
Vehicle: NA6
Location: Victoria

Re: running on 3 cyls when cold.

Postby bartmanftw » Tue Sep 30, 2014 8:20 pm

Your ecu could just be adding too much fuel on warmup

4sfed5
Fast Driver
Posts: 307
Joined: Tue Jul 05, 2005 5:13 pm
Vehicle: NA6 - Turbo
Location: New Zealand
Contact:

Re: running on 3 cyls when cold.

Postby 4sfed5 » Tue Sep 30, 2014 8:34 pm

its not the ecu. full stop. dont even mention it. data logs are rock solid consistant. its a fault with the car somewhere.
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6

User avatar
bruce
Speed Racer
Posts: 7707
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Re: running on 3 cyls when cold.

Postby bruce » Tue Sep 30, 2014 9:34 pm

Well, let's get out our crystal ball(s). The limited information is not helpful.
Take it to a mechanic.

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re: running on 3 cyls when cold.

Postby JBT » Tue Sep 30, 2014 9:46 pm

4sfed5 wrote:its not the ecu. full stop. dont even mention it. data logs are rock solid consistant. its a fault with the car somewhere.

Well you tell us what it isn't and we'll guess what it could be. :mrgreen:
Image

User avatar
gslender
Speed Racer
Posts: 2330
Joined: Sat Feb 19, 2011 10:49 pm
Vehicle: NA6
Location: Brisbane, QLD

Re: running on 3 cyls when cold.

Postby gslender » Tue Sep 30, 2014 10:11 pm

It 100% would be the ecu. If datalogs are saying all is ok then the ecu isn't logging ok

Running on 3 cyl would show up on a wideband clear as day.
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: running on 3 cyls when cold.

Postby sailaholic » Tue Sep 30, 2014 11:18 pm

Ecu or no compression when could or dodgy injector.

Ignition is paired so should be running on two or four.

Injector could be sticky when cold but unlikely to be never play up at all ever when hot but every time when cold.

Compression - no ring - head gasket seal when cold? Do a cold compression test and a warm compression test and see if one cyclinder is down.

If it does it every single time when cold pull an injector plug / ignition lead off and see if the revs drop.

Or... It could be the ecu seeing false wide band results until the sensor warms up.... And flooding it with fuel and making it drive like crap.

My bets on something ecu related.


Sent from my iPhone using Tapatalk

4sfed5
Fast Driver
Posts: 307
Joined: Tue Jul 05, 2005 5:13 pm
Vehicle: NA6 - Turbo
Location: New Zealand
Contact:

Re: running on 3 cyls when cold.

Postby 4sfed5 » Wed Oct 01, 2014 6:26 am

The data logs show injection ms exactly asper logs from when was normal. all other .cu parameters exactly as per old logs when it was fine.
ill do a comp test cold and see what happens.
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6

User avatar
gslender
Speed Racer
Posts: 2330
Joined: Sat Feb 19, 2011 10:49 pm
Vehicle: NA6
Location: Brisbane, QLD

Re: running on 3 cyls when cold.

Postby gslender » Wed Oct 01, 2014 6:56 am

That's a poor way to confirm that the ecu is fine, but if you think that fuel hasn't changed and all is good with the tune, then it's only spark plugs, coils, injectors or fuel pump. If you had a wideband working we'd narrow it down.
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"

User avatar
Black_Penguin
Racing Driver
Posts: 726
Joined: Thu Jun 03, 2010 5:30 pm
Vehicle: NB8A
Location: Ulladulla, South Coast NSW

Re: running on 3 cyls when cold.

Postby Black_Penguin » Wed Oct 01, 2014 12:13 pm

Could be a leaky o-ring on an injector. Fuel leaks around it when the engine is not running and sits in the inlet, it is drawn in at start up and makes one cylinder run rich for a short while.
My Garage Thread WP 1:16.1 SMSP South 1:10.0 WSID 15.6

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: running on 3 cyls when cold.

Postby 93_Clubman » Wed Oct 01, 2014 12:19 pm

4sfed5 wrote:My 1990 na6 runs like a bucket of bolts on cold start up.
after about a minute or so its fine and purr like a kitten if seemingly a little rich.

Above symptom is typical of a bad coolant temp sensor (to an OEM ECU) on the NA6 - might be an issue if it's still utilised on yours:
Image

4sfed5
Fast Driver
Posts: 307
Joined: Tue Jul 05, 2005 5:13 pm
Vehicle: NA6 - Turbo
Location: New Zealand
Contact:

Re: running on 3 cyls when cold.

Postby 4sfed5 » Wed Oct 01, 2014 3:28 pm

thanks 93 clubman. i changed the temp sensor thinking that might be the issue....it wasnt.

i' think i'm leaning towards leaky injector or head gasket on #1 or #2 cylinder...
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re: running on 3 cyls when cold.

Postby JBT » Wed Oct 01, 2014 4:26 pm

Sticking valve or half dead HLA?
Image

J3ro3n

Re: running on 3 cyls when cold.

Postby J3ro3n » Thu Oct 02, 2014 3:51 am

Hi guys I'm new here. But the ecu? No when the car starts on 3 syls when cold. First check your coil -sparkplugs and wiring also your valve cover gasket..... That sounds weird but that did it for me I had the same problem. Gr

4sfed5
Fast Driver
Posts: 307
Joined: Tue Jul 05, 2005 5:13 pm
Vehicle: NA6 - Turbo
Location: New Zealand
Contact:

Re: running on 3 cyls when cold.

Postby 4sfed5 » Thu Oct 02, 2014 7:37 am

I pulled the injection plugs one by one at cold start. cyls 123 all made it worse. cyls 4 made no difference at all. so the issue is either a leaking injector or a cold compression issue in 4
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 6 guests