running on 3 cyls when cold.
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Fast Driver
- Posts: 307
- Joined: Tue Jul 05, 2005 5:13 pm
- Vehicle: NA6 - Turbo
- Location: New Zealand
- Contact:
running on 3 cyls when cold.
My 1990 na6 runs like a bucket of bolts on cold start up. basically feels like its running on 3 cyls. after about a minute or so its fine and purr like a kitten if seemingly a little rich. the car is turbo and running an emanate blue . but data logs are fine.
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6
- bartmanftw
- Fast Driver
- Posts: 451
- Joined: Wed Oct 30, 2013 1:35 pm
- Vehicle: NA6
- Location: Victoria
Re: running on 3 cyls when cold.
Your ecu could just be adding too much fuel on warmup
-
- Fast Driver
- Posts: 307
- Joined: Tue Jul 05, 2005 5:13 pm
- Vehicle: NA6 - Turbo
- Location: New Zealand
- Contact:
Re: running on 3 cyls when cold.
its not the ecu. full stop. dont even mention it. data logs are rock solid consistant. its a fault with the car somewhere.
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: running on 3 cyls when cold.
Well, let's get out our crystal ball(s). The limited information is not helpful.
Take it to a mechanic.
Take it to a mechanic.
- JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Re: running on 3 cyls when cold.
4sfed5 wrote:its not the ecu. full stop. dont even mention it. data logs are rock solid consistant. its a fault with the car somewhere.
Well you tell us what it isn't and we'll guess what it could be.
- gslender
- Speed Racer
- Posts: 2330
- Joined: Sat Feb 19, 2011 10:49 pm
- Vehicle: NA6
- Location: Brisbane, QLD
Re: running on 3 cyls when cold.
It 100% would be the ecu. If datalogs are saying all is ok then the ecu isn't logging ok
Running on 3 cyl would show up on a wideband clear as day.
Running on 3 cyl would show up on a wideband clear as day.
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
-
- Speed Racer
- Posts: 3511
- Joined: Thu May 19, 2011 3:38 pm
- Vehicle: NA8
- Location: Brisbane
Re: running on 3 cyls when cold.
Ecu or no compression when could or dodgy injector.
Ignition is paired so should be running on two or four.
Injector could be sticky when cold but unlikely to be never play up at all ever when hot but every time when cold.
Compression - no ring - head gasket seal when cold? Do a cold compression test and a warm compression test and see if one cyclinder is down.
If it does it every single time when cold pull an injector plug / ignition lead off and see if the revs drop.
Or... It could be the ecu seeing false wide band results until the sensor warms up.... And flooding it with fuel and making it drive like crap.
My bets on something ecu related.
Sent from my iPhone using Tapatalk
Ignition is paired so should be running on two or four.
Injector could be sticky when cold but unlikely to be never play up at all ever when hot but every time when cold.
Compression - no ring - head gasket seal when cold? Do a cold compression test and a warm compression test and see if one cyclinder is down.
If it does it every single time when cold pull an injector plug / ignition lead off and see if the revs drop.
Or... It could be the ecu seeing false wide band results until the sensor warms up.... And flooding it with fuel and making it drive like crap.
My bets on something ecu related.
Sent from my iPhone using Tapatalk
-
- Fast Driver
- Posts: 307
- Joined: Tue Jul 05, 2005 5:13 pm
- Vehicle: NA6 - Turbo
- Location: New Zealand
- Contact:
Re: running on 3 cyls when cold.
The data logs show injection ms exactly asper logs from when was normal. all other .cu parameters exactly as per old logs when it was fine.
ill do a comp test cold and see what happens.
ill do a comp test cold and see what happens.
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6
- gslender
- Speed Racer
- Posts: 2330
- Joined: Sat Feb 19, 2011 10:49 pm
- Vehicle: NA6
- Location: Brisbane, QLD
Re: running on 3 cyls when cold.
That's a poor way to confirm that the ecu is fine, but if you think that fuel hasn't changed and all is good with the tune, then it's only spark plugs, coils, injectors or fuel pump. If you had a wideband working we'd narrow it down.
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
- Black_Penguin
- Racing Driver
- Posts: 726
- Joined: Thu Jun 03, 2010 5:30 pm
- Vehicle: NB8A
- Location: Ulladulla, South Coast NSW
Re: running on 3 cyls when cold.
Could be a leaky o-ring on an injector. Fuel leaks around it when the engine is not running and sits in the inlet, it is drawn in at start up and makes one cylinder run rich for a short while.
My Garage Thread WP 1:16.1 SMSP South 1:10.0 WSID 15.6
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: running on 3 cyls when cold.
4sfed5 wrote:My 1990 na6 runs like a bucket of bolts on cold start up.
after about a minute or so its fine and purr like a kitten if seemingly a little rich.
Above symptom is typical of a bad coolant temp sensor (to an OEM ECU) on the NA6 - might be an issue if it's still utilised on yours:
-
- Fast Driver
- Posts: 307
- Joined: Tue Jul 05, 2005 5:13 pm
- Vehicle: NA6 - Turbo
- Location: New Zealand
- Contact:
Re: running on 3 cyls when cold.
thanks 93 clubman. i changed the temp sensor thinking that might be the issue....it wasnt.
i' think i'm leaning towards leaky injector or head gasket on #1 or #2 cylinder...
i' think i'm leaning towards leaky injector or head gasket on #1 or #2 cylinder...
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6
- JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Re: running on 3 cyls when cold.
Sticking valve or half dead HLA?
Re: running on 3 cyls when cold.
Hi guys I'm new here. But the ecu? No when the car starts on 3 syls when cold. First check your coil -sparkplugs and wiring also your valve cover gasket..... That sounds weird but that did it for me I had the same problem. Gr
-
- Fast Driver
- Posts: 307
- Joined: Tue Jul 05, 2005 5:13 pm
- Vehicle: NA6 - Turbo
- Location: New Zealand
- Contact:
Re: running on 3 cyls when cold.
I pulled the injection plugs one by one at cold start. cyls 123 all made it worse. cyls 4 made no difference at all. so the issue is either a leaking injector or a cold compression issue in 4
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 0 guests