Tyre pressure Pilot Sport 3 on NC

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
CoachOz
Fast Driver
Posts: 238
Joined: Fri Aug 12, 2011 11:54 pm
Vehicle: ND - 2 GT
Location: Bonny Hills NSW
Contact:

Tyre pressure Pilot Sport 3 on NC

Postby CoachOz » Sun Aug 31, 2014 8:56 am

I've just renewed the 215x17x45 Michelin Pilot Sport 3's on my NC and queried the fitter's recommended pressure of 38 psi. In return I got a lecture when I asked him to drop the pressure down to 30 psi - said I would scrub out the tyres, I reckon 38 would make the car bounce around. I'd appreciate some feedback on this.
2020 ND 2 GT
2000 NB Heritage

[imgImageHeritage 2 by Peter Rodgers, on Flickr[/img]

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re: Tyre pressure Pilot Sport 3 on NC

Postby JBT » Sun Aug 31, 2014 11:38 am

My thoughts on cold settings:
38 is far too high.
30 is OK for around town.
32-33 is good all round
Image

User avatar
taminga16
Speed Racer
Posts: 3617
Joined: Thu Aug 06, 2009 12:22 am
Vehicle: NC
Location: Central Victoria

Re: Tyre pressure Pilot Sport 3 on NC

Postby taminga16 » Sun Aug 31, 2014 11:44 am

Hi Peter,
I am with JBT and running 30 psi in my B/S 001's, I would probably got to 32 psi for long Hwy travel (they will run a little cooler).
Greg.
P.S. There is no noticable 'scrubbing'.
When you turn your car on, does it return the favour?

User avatar
Guran
Speed Racer
Posts: 3754
Joined: Sun Feb 15, 2009 6:42 pm
Vehicle: ND - 1.5
Location: Albion Park NSW
Contact:

Re: Tyre pressure Pilot Sport 3 on NC

Postby Guran » Sun Aug 31, 2014 3:01 pm

38psi is fine for lardy falcodores and SUVs. Those pressures should only be seen on MX-5s at the track or motorkhana.
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25

User avatar
taminga16
Speed Racer
Posts: 3617
Joined: Thu Aug 06, 2009 12:22 am
Vehicle: NC
Location: Central Victoria

Re: Tyre pressure Pilot Sport 3 on NC

Postby taminga16 » Sun Aug 31, 2014 7:10 pm

Peter,
I happened to bump into my Tyre bloke today (Farmers Mkt) and he was horrified because the middle of the tyre will wear in a matter of days, although he did say that running a high pressure for two or three days will ensure that the bead settles to the rim.
Greg.
When you turn your car on, does it return the favour?

User avatar
CoachOz
Fast Driver
Posts: 238
Joined: Fri Aug 12, 2011 11:54 pm
Vehicle: ND - 2 GT
Location: Bonny Hills NSW
Contact:

Re: Tyre pressure Pilot Sport 3 on NC

Postby CoachOz » Sun Aug 31, 2014 7:35 pm

Well it seems as though the bloke from Jax Tyres in Port Macquarie is clueless when it comes to MX-5 tyre pressures. My tyres are now at 31 psi {using my hand held gauge) and all set to drive to Brisbane next weekend.

Thanks everyone for your info.
2020 ND 2 GT
2000 NB Heritage

[imgImageHeritage 2 by Peter Rodgers, on Flickr[/img]


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 367 guests