Flashing Lights on Roll Bar

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: Flashing Lights on Roll Bar

Postby hks_kansei » Sun Aug 31, 2014 9:39 am

sailaholic wrote:Not really. If it's ok for bikes it might be ok for cars.



Way different rules.

Car has to meet rego, RWC, ADRs, licence to use, etc

A bike pretty much just needs wheels and brakes.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

Snowmotion
Racing Driver
Posts: 750
Joined: Mon Jul 29, 2013 8:47 pm
Vehicle: NC
Location: Sydney

Re: Flashing Lights on Roll Bar

Postby Snowmotion » Sun Aug 31, 2014 9:47 am

hks_kansei wrote:
sailaholic wrote:
A bike pretty much just needs wheels and brakes.


And a bell! :)
NB8A| WP 1:15.6 | SMP-S 1:08.56 | SMP-N 1:21.35
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: Flashing Lights on Roll Bar

Postby Magpie » Sun Aug 31, 2014 9:55 am

Section 68/79/71/72 TRANSPORT OPERATIONS (ROAD USE MANAGEMENT—VEHICLE STANDARDS AND SAFETY) REGULATION 2010

http://www.austlii.edu.au/cgi-bin/download.cgi/cgi-bin/download.cgi/download/au/legis/qld/consol_reg/toumsasr2010759.pdf

In Queensland it is legal!

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Flashing Lights on Roll Bar

Postby Mr Morlock » Sun Aug 31, 2014 11:56 am

What is legal and what section ( this refers QLD only) refers to the original post i.e. having a red signal light that presumably flashes intermittently. It has to be a non standard function and very doubtful if its legal anywhere in Au.

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: Flashing Lights on Roll Bar

Postby Magpie » Sun Aug 31, 2014 12:39 pm

Point Mr Morlock, flashing would not be acceptable in Queensland. However a high mounted brake light on the roll bar would be acceptable.

This is where I have mine mounted. It is only used as a rain light and can be turned flashing if needed. As previously mentioned it could be wired as a brake light as well as a rain light.

Image
LED on Flickr

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Flashing Lights on Roll Bar

Postby Mr Morlock » Sun Aug 31, 2014 5:01 pm

An high mount stop light would work well though I am not sure if that might be annoying with roof up. I suppose you could put a switch to disable with roof up.

Dupain

Re: Flashing Lights on Roll Bar

Postby Dupain » Sun Aug 31, 2014 5:42 pm

Magpie wrote:Point Mr Morlock, flashing would not be acceptable in Queensland. However a high mounted brake light on the roll bar would be acceptable.

This is where I have mine mounted. It is only used as a rain light and can be turned flashing if needed. As previously mentioned it could be wired as a brake light as well as a rain light.

Image
LED on Flickr


Need to put it on the spolier for safety.

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: Flashing Lights on Roll Bar

Postby Magpie » Sun Aug 31, 2014 5:58 pm

Da pain do you understand the aerodynamic impact that your suggestion would have?

I doubt that you would have even done your wikipedia/eHow research, but what you have suggested was done at the Le Mans. The rear wing endplates had LED lights in them, however the OP was asking about roll bar mounted ones...

Image

Please confine your ramblings to your own threads and not bog down a legitimate one. Also no need to do a nested quote!

Dupain

Re: Flashing Lights on Roll Bar

Postby Dupain » Sun Aug 31, 2014 6:11 pm

Magpie wrote:Da pain do you understand the aerodynamic impact that your suggestion would have?

I doubt that you would have even done your wikipedia/eHow research, but what you have suggested was done at the Le Mans. The rear wing endplates had LED lights in them, however the OP was asking about roll bar mounted ones...

Image

Please confine your ramblings to your own threads and not bog down a legitimate one. Also no need to do a nested quote!


Just looking out for you, Magpie. Don't want a Cessna rear ending you.


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 1 guest