OBX ITB

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Post Reply
emily_mx5
Racing Driver
Posts: 1720
Joined: Wed Aug 03, 2011 5:57 pm
Vehicle: NB SE
Location: Sydney

Re: OBX ITB

Postby emily_mx5 » Sun Aug 24, 2014 10:43 am

What headwork are you planning? What size cams?
Top
User avatar
Black_Penguin
Racing Driver
Posts: 726
Joined: Thu Jun 03, 2010 5:30 pm
Vehicle: NB8A
Location: Ulladulla, South Coast NSW

Re: OBX ITB

Postby Black_Penguin » Sun Aug 24, 2014 10:50 am

Will you be running socks or have a cover made up or let them run open?
My Garage Thread WP 1:16.1 SMSP South 1:10.0 WSID 15.6
Top
manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: OBX ITB

Postby manga_blue » Sun Aug 24, 2014 11:49 am

I keep wondering about that 48mm bit on the OBXs. If it were Webers we were talking about then they'd be twin 48DCOEs. In an 1800cc motor you'd only be using those if you were looking for max power at around 8500-9500RPM. At road speeds they'd be p1gs.
’95 NA8
Top
sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: OBX ITB

Postby sailaholic » Sun Aug 24, 2014 1:22 pm

Yeah the early toyotas (ae101) as 42mm and the late ones were 45 (ae111)


Sent from my iPhone using Tapatalk
Top
User avatar
zossy1
Racing Driver
Posts: 1979
Joined: Wed Aug 18, 2010 8:48 am
Vehicle: NA8
Location: Southern Highlands, NSW
Contact:
Contact zossy1

Re: OBX ITB

Postby zossy1 » Sun Aug 24, 2014 3:30 pm

gslender wrote:Challenge accepted..... Goes and orders a set to go with the equal length tuned 4-1 headers.....


I have the greatest faith in you Grant... if anyone can make them cold and hot start, you can!

They are still too big though :)
Top
Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: OBX ITB

Postby Magpie » Sun Aug 24, 2014 3:32 pm

Grant you already have Jenvey's so why do you want another set?
Top
User avatar
gslender
Speed Racer
Posts: 2330
Joined: Sat Feb 19, 2011 10:49 pm
Vehicle: NA6
Location: Brisbane, QLD

Re: OBX ITB

Postby gslender » Sun Aug 24, 2014 4:50 pm

Was speaking for dupain and should have typed unequal length headers


Sent from my iPhone using Tapatalk
MX5 91 NA6 LE completely stock and loving it!
MX5 92 NA8/ITBs Silver "aka Track Beeotch"
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 113 guests