Welcome to the forum.
If you say what the symptoms are someone with more technical knowledge than myself will chime in.
For what it's worth, my clutch was perfect for 127,500kms. It only got changed because the engine was out for a rebuild. It would have done about another 10,000kms on the friction material that was left.
Gear change se 6 speed
Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel
- davekmoore
- Speed Racer
- Posts: 4681
- Joined: Thu Apr 30, 2009 1:53 am
- Vehicle: NC
- Location: Esprick, UK
Re: Gear change se 6 speed
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
-
- Fast Driver
- Posts: 213
- Joined: Thu Jan 20, 2011 11:17 pm
- Vehicle: NA6
Re: Gear change se 6 speed
do the simple thing first.
#check to see if the master and slave are not leaking
#bleed the master and slave
#check to see if the slave throws the full way
#change gearbox oil
ect
if the car has been sitting for years there could be water in the fluid , rust in the slave or master.
#check to see if the master and slave are not leaking
#bleed the master and slave
#check to see if the slave throws the full way
#change gearbox oil
ect
if the car has been sitting for years there could be water in the fluid , rust in the slave or master.
- davekmoore
- Speed Racer
- Posts: 4681
- Joined: Thu Apr 30, 2009 1:53 am
- Vehicle: NC
- Location: Esprick, UK
Re: Gear change se 6 speed
You may have the lowest kms SE in the world. It is also probably very overdue a major service. Having this done by a proper MX5 specialist would be a very worthwhile investment. Please say you've at least changed all the fluids since you bought it - or that you're not driving it?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
- zossy1
- Racing Driver
- Posts: 1979
- Joined: Wed Aug 18, 2010 8:48 am
- Vehicle: NA8
- Location: Southern Highlands, NSW
- Contact:
Re: Gear change se 6 speed
Your slave is almost certainly gone. After that much time sitting, the master may be pretty average also.
Squeeze the slave cylinder boot.
Squeeze the slave cylinder boot.
- Black_Penguin
- Racing Driver
- Posts: 726
- Joined: Thu Jun 03, 2010 5:30 pm
- Vehicle: NB8A
- Location: Ulladulla, South Coast NSW
Re: Gear change se 6 speed
Also for a Mx5 friendly work shop, Deckspeed Racing at Padstow would be my recommendation.
My Garage Thread WP 1:16.1 SMSP South 1:10.0 WSID 15.6
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 3 guests