Anyone Fitted a Velo GPT1 Seat?

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

forcedfive
Fast Driver
Posts: 429
Joined: Wed Jan 22, 2014 11:55 am
Vehicle: 10AE - Turbo
Location: Sydney

Anyone Fitted a Velo GPT1 Seat?

Postby forcedfive » Tue Jul 08, 2014 6:40 pm

Hi,
I have been told that this Velo GPT1 seat fits in an Nb Ok. Can anyone who has fitted this seat confirm this and if it in fact fits OK and is easy to fit?

Cheers
10AE
WP 1:04.7 SMSP GP 1:43.0 South 1:00.8 North 1:09.8

jimmy_vee
Fast Driver
Posts: 169
Joined: Tue Oct 26, 2010 6:41 pm

Re: Anyone Fitted a Velo GPT1 Seat?

Postby jimmy_vee » Tue Jul 08, 2014 7:55 pm

I had them in my NA and the shoulders/wings hit the upper door card trim on the drivers side and I had to remove the upper trim on the passenger side to get that door to close. I think the NB door cards give even less room than the NA ones do, so it is going to be a very tight fit. If you can do a test fit of them before you hand over any money.

User avatar
tescoking
Racing Driver
Posts: 824
Joined: Sat Dec 01, 2012 1:48 am
Vehicle: NB8B
Location: Perth, WA

Re: Anyone Fitted a Velo GPT1 Seat?

Postby tescoking » Tue Jul 08, 2014 8:02 pm

I don't think you can close the door on an NB. I had something very similar from U.S. then I sold the seats to a commodore owner.
My 5
Late 2000 Sunlight Silver NB8B
Image

User avatar
bigdog
King of the kennel
Posts: 2233
Joined: Wed May 25, 2005 3:07 pm
Vehicle: NB SP
Location: Blue Mountains
Contact:

Re: Anyone Fitted a Velo GPT1 Seat?

Postby bigdog » Wed Jul 09, 2014 10:16 pm

I have seen a fibreglass Velo seat in an NB, but the outside shoulder wing edge had been cut back to fit - not pretty, but quite functional.
Image
Marvin - '02 Silver SP - BD, PSS9, Guru, Build #62 Cardomain

track_addict
Fast Driver
Posts: 400
Joined: Thu Oct 15, 2009 9:12 am
Vehicle: NB SE
Location: Adelaide

Re: Anyone Fitted a Velo GPT1 Seat?

Postby track_addict » Wed Jul 09, 2014 10:54 pm

I tried to fit a GPT-1 to my SE with a PCI V2 set back mount. Didn't work out. Being tall I couldn't get the seat back far enough and the wing hit the door card quite badly. To make it fit you woul have to fit on a big angle with your body facing towards the front right wheel. Would probably work on a car with a stripped interior. Nest with another seat unfortunately. Velo products are top notch, just not built for MX5's :(.
89' Roadster - Sold
'04 SE - Sunlight Silver.

forcedfive
Fast Driver
Posts: 429
Joined: Wed Jan 22, 2014 11:55 am
Vehicle: 10AE - Turbo
Location: Sydney

Re: Anyone Fitted a Velo GPT1 Seat?

Postby forcedfive » Wed Jul 09, 2014 11:50 pm

Thanks for the feedback. Looks like the Velo seats are not an options.

Cheers.
10AE
WP 1:04.7 SMSP GP 1:43.0 South 1:00.8 North 1:09.8

track_addict
Fast Driver
Posts: 400
Joined: Thu Oct 15, 2009 9:12 am
Vehicle: NB SE
Location: Adelaide

Re: Anyone Fitted a Velo GPT1 Seat?

Postby track_addict » Thu Jul 10, 2014 8:02 am

I was at the Velo factory and was talking with the guys there about not being ableto fit the GPT-1 and they said the GT-Apex would maybe fit. But thats just speculation. What I've found is you'll have trouble fitting a seat with wings any wider than a Sprint V, to a car with full trim.
89' Roadster - Sold
'04 SE - Sunlight Silver.

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: Anyone Fitted a Velo GPT1 Seat?

Postby sailaholic » Thu Jul 10, 2014 8:39 am

Tried googling? I've seen paired velos fitted to mx5s. Someone here sold a pair that they had fitted.

Wings touched door cards for memory but nothing chopped.


Sent from my iPhone using Tapatalk

ausbuoy
Fast Driver
Posts: 255
Joined: Wed Jan 16, 2013 3:16 pm
Vehicle: NA6 - Turbo
Location: YBBN

Re: Anyone Fitted a Velo GPT1 Seat?

Postby ausbuoy » Thu Jul 10, 2014 9:13 am

I have a VELO fitted to my NA- to get full seat travel & seat belt not binding, just clip 1wing:) It'll still FLY!
WAT WOULD WE DO IF WE WERE NOT AFRAID

deviant
Racing Driver
Posts: 1717
Joined: Thu Apr 15, 2010 7:23 pm
Vehicle: NB8B
Location: Rockingham - Western Australia

Re: Anyone Fitted a Velo GPT1 Seat?

Postby deviant » Thu Jul 10, 2014 11:14 am

I have seen GP90 in an NA. Last time I looked at Velo seats at a race shop they said that you can actually do special order seats including trimming the wings down and finishing the seat properly. You probably only need to take an inch off.

This link has suggested seat dimensions that work the best: http://www.flyinmiata.com/tech/seats.php

These are the Velo specs: http://velo.com.au/site_files/421/velo% ... 0chart.pdf

Best thing you can do really is take your passenger seat out and go to a race shop and see what fits!

User avatar
mx5002
Racing Driver
Posts: 561
Joined: Mon Nov 26, 2012 7:36 pm
Vehicle: NB8B
Location: southwest sydney

Re: Anyone Fitted a Velo GPT1 Seat?

Postby mx5002 » Wed Aug 13, 2014 6:25 pm

Velo milano are the seats that will fit into an mx5.

Hjt had two of the extra large ones fitted in his sp.
GREEN ITB'd NB8B
SMSP south 1.04.30 SMSP GP 1:53:12 SMSP Brabham 2.21.11
Marulan 47.01
Wakefield 1.09.64 :D

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: Anyone Fitted a Velo GPT1 Seat?

Postby sailaholic » Wed Aug 13, 2014 7:04 pm

It's been done there were a pair with custom eunos logos on them sold through the forum nearly a year ago.


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: Google [Bot] and 127 guests