Ceptor's NA6
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
Alright not a whole lot has been happening lately, mainly just ordering parts and waiting on them to be delivered. Once the baffle arrives from Japan and the motor gets the new water pump, timing kit and gaskets etc it will be going to my fabricator for all the pipe work to be done.
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
Baffle is in, new timing kit and water pump also went on last night. Now its just the intake gaskets, put the new injectors on and give it a clean
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
-
- Fast Driver
- Posts: 187
- Joined: Tue Aug 20, 2013 11:02 am
- Vehicle: NA6
Re: Ceptor's NA6
How many beverages and pizza has the engine cost you?
I've lost count
I've lost count
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
CM sport wrote:How many beverages and pizza has the engine cost you?
I've lost count
$60 in pizza, lost count of beverages haha
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
Its been a while since I posted, not a great deal has been happening lately as a shop stuffed me around big time, I've just been slowly organising bits and pieces.
I thought I would try out a set of the ultra racing fender braces, now I haven't had a chance to take the car on a good drive yet but initial thoughts are they improve the feel of the steering in a way that it feels it has more point earlier on and the scuttle is reduced but not 100% gone.
I also fitted up a black nb soft top as I got over the blue one when I fitted the spoiler, still having an issue getting the tree sap off though after trying boiling water, vinyl cleaner, vinyl revivor, eucalyptus oil and dishwashing detergent. Any more ideas?
Sent from my GT-I9505 using Tapatalk
I thought I would try out a set of the ultra racing fender braces, now I haven't had a chance to take the car on a good drive yet but initial thoughts are they improve the feel of the steering in a way that it feels it has more point earlier on and the scuttle is reduced but not 100% gone.
I also fitted up a black nb soft top as I got over the blue one when I fitted the spoiler, still having an issue getting the tree sap off though after trying boiling water, vinyl cleaner, vinyl revivor, eucalyptus oil and dishwashing detergent. Any more ideas?
Sent from my GT-I9505 using Tapatalk
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
More parts have been arriving I really can't wait to have the car back together and driving again now
New 1/4 windows
New seats
New 1/4 windows
New seats
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
Mechanic kitty giving me a helping paw
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
- bruce
- Speed Racer
- Posts: 7706
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: Ceptor's NA6
I reckon just leave the tree sap, it will wear away by itself.
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
bruce wrote:I reckon just leave the tree sap, it will wear away by itself.
Turns out its not tree sap, its paint which explains why its been such a bitch to get off
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
A couple more goodies, the car will be off to my fabricator in the next week or so then once its all finished it will be going in for paint
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
Bit of an update of how things look right now
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Ceptor's NA6
Finally!
Suli?
Suli?
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
Haha yeah I know its taken a little while. Impossible Fabrication made it
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
The manifold was pretty much finished off last week, just need to clean it up and get it ceramic coated. The intercooler has been mounted and the pipework completed, oil cooler has also been mounted.
Here are a few better shots of the manifold.
Here are a few better shots of the manifold.
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
-
- Fast Driver
- Posts: 134
- Joined: Wed Aug 07, 2013 9:22 pm
- Vehicle: NA6
Re: Ceptor's NA6
Bit of a progress shot. The intercooler piping was finished off last week, the oil cooler position was mocked up and dump pipe was started on. I still need to get a coolant re-route, at the moment I'm looking at the 949 Racing one, does anyone have any opinions or advice on them? I also have to order a new alloy radiator to replace the standard one to keep everything nice and cool.
...NA6 Turbo Build...
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=59350
Who is online
Users browsing this forum: No registered users and 276 guests