Boot lighting
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Boot lighting
Here's a question I asked myself today.
If the lights for the number plate are on the boot lid, then why don't they come on when the boot is open?
I only ask after looking for a bag in the boot at night, leaning forward and smashing my head on the boot lid.
Any ideas for boot lighting?
Either using the number plate lamps or otherwise?
Sent from my GT-I9100 using Tapatalk
If the lights for the number plate are on the boot lid, then why don't they come on when the boot is open?
I only ask after looking for a bag in the boot at night, leaning forward and smashing my head on the boot lid.
Any ideas for boot lighting?
Either using the number plate lamps or otherwise?
Sent from my GT-I9100 using Tapatalk
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Boot lighting
Not on my laptop so can't find the link, but this has been done on Miata.net iirc.
Just Google and you'll find a "how to" ...
Sent from my GT-I9100T using Tapatalk
Just Google and you'll find a "how to" ...
Sent from my GT-I9100T using Tapatalk
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Boot lighting
Here ya go. Managed to find it on my phone ;)
http://www.miata.net/garage/99LicensePlateLight.html
Sent from my GT-I9100T using Tapatalk
http://www.miata.net/garage/99LicensePlateLight.html
Sent from my GT-I9100T using Tapatalk
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Boot lighting
... now you've bought this up ... I should do this mod myself .......
Sent from my GT-I9100T using Tapatalk
Sent from my GT-I9100T using Tapatalk
- fastfreddygassit
- Waitin' for a mate
- Posts: 1773
- Joined: Sat Jun 25, 2005 8:00 pm
- Vehicle: NB SE
- Location: Waitin' for a mate in Melbourne somewhere
- Contact:
Re: Boot lighting
KevGoat wrote:I should do this mod myself
yes you should. It's stock on the SE........
- plohl
- Racing Driver
- Posts: 1922
- Joined: Wed Oct 14, 2009 12:13 am
- Vehicle: NA8
- Location: Brisbane
- smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Re: Boot lighting
The OMGPham kit looks pretty neat, I like that it uses a release switch instead of trying to wire into another circuit.
Looks like $90 well spent.
Looks like $90 well spent.
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Boot lighting
fastfreddygassit wrote:KevGoat wrote:I should do this mod myself
yes you should. It's stock on the SE........
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: Boot lighting
does the boot get illuminated with the lid up and parkers on? A good plan - refer davemoore recently- have a small torch in the glove box or App on phone. Dave was right about the fuse box- bloody impossible to read it at night and at an angle.
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Boot lighting
Mr Morlock wrote:does the boot get illuminated with the lid up and parkers on? .
It does, surprisingly well actually.
I tend to do this when I need to unload/load the boot at night
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
-
- Racing Driver
- Posts: 1720
- Joined: Wed Aug 03, 2011 5:57 pm
- Vehicle: NB SE
- Location: Sydney
Re: Boot lighting
My SE lights come on when the boot is opened. And I swapped in LEDs, so it's really bright. Would be really easy to put in a switch to make normal NB's lights turn on.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Vat
- Racing Driver
- Posts: 891
- Joined: Tue Dec 31, 2013 9:14 am
- Vehicle: NB8A
- Location: SW Brisbane
Re: Boot lighting
plohl wrote:Omgpham has boot lights now.... http://omgpham.com/boot-light
Nice. I've been using a small magnetic/adhesive motion-sensing LED light (similar to this:http://www.infmetry.com/home-decor/lighting/motion-sensor-led-night-light) that I'd picked up for about $10 via COTD (or similar) a few months ago but it does get through batteries.
'98 Evo Gold NB8A
QR-Clubman 66.5109|Sprint 63.3635|Sportsman 67.4673|National 92.3481|Lakeside 65.7478|MP K 1:35.382|MP E 1:16.422|NM 1:08.017
QR-Clubman 66.5109|Sprint 63.3635|Sportsman 67.4673|National 92.3481|Lakeside 65.7478|MP K 1:35.382|MP E 1:16.422|NM 1:08.017
-
- Fast Driver
- Posts: 242
- Joined: Tue Feb 22, 2005 8:04 pm
- Vehicle: NB8A
- Location: central coast
- Contact:
Re: Boot lighting
Sticky back led strip , active with in line fuse wired straight to the battery and the neutral hooked up to a "tamper/pin style" switch jaycar part no LE-8775. Drill a hole in the lip next to the seal wire up and a small bit of rubber etc on top to protect your paint.
Adjust and test it doesn't stay on. Done :-)
I tested it going off buy using the video recorder on my phone
Adjust and test it doesn't stay on. Done :-)
I tested it going off buy using the video recorder on my phone
- smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Re: Boot lighting
Dad pulled the rear LED centre brake light from his VE, the other day because it stopped working.
The LEDs are still working but I'll be chopping/re-soldering the strip because there's no continuity across the main + and - terminals.
So somethings gone, but the LEDs are all good.
I'll combine the strip with a non latching switch.
Already have all the parts besides the switch.
Should be a good cheap project.
Sent from my GT-I9100 using Tapatalk
The LEDs are still working but I'll be chopping/re-soldering the strip because there's no continuity across the main + and - terminals.
So somethings gone, but the LEDs are all good.
I'll combine the strip with a non latching switch.
Already have all the parts besides the switch.
Should be a good cheap project.
Sent from my GT-I9100 using Tapatalk
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
- kalt
- Fast Driver
- Posts: 379
- Joined: Wed Jan 01, 2014 9:44 pm
- Vehicle: NB8B
- Location: Vic
- Contact:
Re: Boot lighting
How about one of these Magic Touch Motion Sensor lights? Double-sided tape the backside and stick it to the boot lid.
Removal is straightforward just rip it out.
https://www.masters.com.au/product/9000 ... ight-8-led
It's not like anyone can fit inside the boot to trigger the sensor and drain the batteries..
Removal is straightforward just rip it out.
https://www.masters.com.au/product/9000 ... ight-8-led
It's not like anyone can fit inside the boot to trigger the sensor and drain the batteries..
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 160 guests