Hey all i have a 1991 mx5 without any factory bracing.
Just wanting to know what car is suitable for a donor? I believe anything upto 1998 though im not sure..
Can someone please confirm i can fit bracing off any 1993-1998?
Thanks very much!
this is the pic of what i am talking about
Quick question - Factory underbody brace
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Fast Driver
- Posts: 218
- Joined: Tue Sep 25, 2012 9:11 am
- MrRevhead
- Racing Driver
- Posts: 715
- Joined: Mon Mar 26, 2012 2:40 pm
- Vehicle: NA6
- Location: NW Sydney
Re: Quick question - Factory underbody brace
Yep, no a problem, identical chassis across all the NA's (although, NA's ended in 1997).Sage wrote:Can someone please confirm i can fit bracing off any 1993-1998?
1991 NA6 BRG Limited Edition #124 (Aus Delivered)
-
- Fast Driver
- Posts: 218
- Joined: Tue Sep 25, 2012 9:11 am
Re: Quick question - Factory underbody brace
ncie one mate. thanks for the quick reply!
-
- Driver
- Posts: 43
- Joined: Sun Jun 01, 2014 4:19 am
- Vehicle: NA6
Re: Quick question - Factory underbody brace
your old subframe probably won't have those tabs welded on tho.... you'll need to add them
- taminga16
- Speed Racer
- Posts: 3617
- Joined: Thu Aug 06, 2009 12:22 am
- Vehicle: NC
- Location: Central Victoria
Re: Quick question - Factory underbody brace
Search the big forum, I seem to recall someone DYI fabricating some of these.
Greg.
Greg.
When you turn your car on, does it return the favour?
- lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Re: Quick question - Factory underbody brace
Early cars won't have the right subframe to be able to bolt them on. By all means put braces on your car if your goal is to make your car heavier, and spend some money.
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
- plohl
- Racing Driver
- Posts: 1922
- Joined: Wed Oct 14, 2009 12:13 am
- Vehicle: NA8
- Location: Brisbane
Re: Quick question - Factory underbody brace
The NA6 chassis is also missing the mounting points at the front of the brace. The effort to put the bracing on seriously outweighs any benefits you may/may not get from it.
Cheers,
plohl
plohl
-
- Fast Driver
- Posts: 218
- Joined: Tue Sep 25, 2012 9:11 am
Re: Quick question - Factory underbody brace
damn.. looks like i asked the right people! i wont bother then.. thanks again guys!
-
- Fast Driver
- Posts: 485
- Joined: Fri Mar 15, 2013 1:30 pm
- Vehicle: NA6
- Location: Brisbane
-
- Fast Driver
- Posts: 218
- Joined: Tue Sep 25, 2012 9:11 am
Re: Quick question - Factory underbody brace
is that a flyin-miata one? mild steel? can i weld it rather than bolt it?
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 126 guests