I have a set of RC Engineering 550CC injectors for my mx5. I need to know what the dead times are for these. I did a lot of searching online but found nothing, unfortunately RC won't answer any of my emails. I've been told they are possibly 0.8, but it's only speculation. Car is dumping in way too much fuel and keeps flooding even when REQ fuel is set to 1.0.
When I run the car with stock injectors it idles fine but fuel cuts on boost at sudden throttle. Will idle fine with oem ones. Sent the RC injectors off to be cleaned and flow tested. I got them back later in the week reported to be running fine. Multimetered everything.
Little bit annoyed, hoping to get this car running.
If anyone can shoot me those dead times it would be amazing. Advice on the other stuff would be good too.
Injector dead times
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
-
Mr nanotech
- Racing Driver
- Posts: 1487
- Joined: Sat Jan 23, 2010 4:35 pm
- Vehicle: NA6
- Location: Rotting away in the 'Greater' City of Geelong...
- Contact:
Injector dead times
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons.
-
Hellmun
- Racing Driver
- Posts: 979
- Joined: Sat Feb 10, 2007 1:15 pm
- Vehicle: NB8B - Turbo
- Location: Wollongong,NSW
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 136 guests
