Engine flat spots
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Driver
- Posts: 47
- Joined: Thu Oct 17, 2013 8:26 pm
- Vehicle: NB8B
- Location: Inverell
Engine flat spots
After some advice, my nb 2001 has flat spots when dríven at a constant speed, accelerating after it gets over the flat spot seems fine. It idles fine,flat spot appears around the 2000 rpm mark and it takes a bit to get over the flat spot when it does it appears ok. Hope it makes sense, anyone got any ideas?. Thanks
- MrRevhead
- Racing Driver
- Posts: 715
- Joined: Mon Mar 26, 2012 2:40 pm
- Vehicle: NA6
- Location: NW Sydney
Re: Engine flat spots
Firstly, check your timing.
Then check/Replace the following consumables:
Spark Plugs
Ignition Leads
Fuel Filter
Add some fuel injector cleaner additive (or run a few tanks of premium 98)
If you're still experiencing a flat spot, try and borrow an ignition coil to eliminate it as being the culprit before replacing.
Sent from my Galaxy Nexus using Tapatalk
Then check/Replace the following consumables:
Spark Plugs
Ignition Leads
Fuel Filter
Add some fuel injector cleaner additive (or run a few tanks of premium 98)
If you're still experiencing a flat spot, try and borrow an ignition coil to eliminate it as being the culprit before replacing.
Sent from my Galaxy Nexus using Tapatalk
1991 NA6 BRG Limited Edition #124 (Aus Delivered)
- ED_MX5
- Fast Driver
- Posts: 342
- Joined: Sun Jun 01, 2014 1:32 pm
- Vehicle: NB8B
- Location: Sydney-northern beaches
Re: Engine flat spots
[quote="MrRevhead"]Firstly, check your timing.
Then check/Replace the following consumables:
Spark Plugs
Ignition Leads
Fuel Filter
Add some fuel injector cleaner additive (or run a few tanks of premium 98)
Also. Try replacing air filter. At around 2000 rpm the engine is under severe load and will need all the air it can get, after that mark it has got the car moving and begins to relax. Much like pushing a car, hard at first then easy when it gets going.
If air filter clogged, car has asthma.
Then check/Replace the following consumables:
Spark Plugs
Ignition Leads
Fuel Filter
Add some fuel injector cleaner additive (or run a few tanks of premium 98)
Also. Try replacing air filter. At around 2000 rpm the engine is under severe load and will need all the air it can get, after that mark it has got the car moving and begins to relax. Much like pushing a car, hard at first then easy when it gets going.
If air filter clogged, car has asthma.
-PRAISE THE LOWERED-
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Engine flat spots
Yeah at 2000rpm when driving at a constant speed the engine is consuming a lot of air, huge amounts, this particular situation is where the car really needs a clean air filter.
Dann
EDIT: for future reference I was kidding.
Dann
EDIT: for future reference I was kidding.
Last edited by NitroDann on Tue Jun 03, 2014 7:51 pm, edited 1 time in total.
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
- ED_MX5
- Fast Driver
- Posts: 342
- Joined: Sun Jun 01, 2014 1:32 pm
- Vehicle: NB8B
- Location: Sydney-northern beaches
Re: Engine flat spots
Having though about it, possibly sticky injector. Injector cleaner works well, but not as well as a proper service.
2 options:
1- get them serviced by an EFI specialist( not mechanic because they will just outsource it and put their own markup on it)
2- buy all new injectors (budget allowing) and even if it doesn't fix, at least you'll know they're new.
2 options:
1- get them serviced by an EFI specialist( not mechanic because they will just outsource it and put their own markup on it)
2- buy all new injectors (budget allowing) and even if it doesn't fix, at least you'll know they're new.
-PRAISE THE LOWERED-
-
- Speed Racer
- Posts: 3471
- Joined: Sun Jan 19, 2014 9:52 am
- Vehicle: NA6
- Location: Lugarno, Sydney
Re: Engine flat spots
Air filter is an easy check. Unfortunately for me, all my running issues have never been something simple as the air filter.
Could it be the TPS? Sorry don't have an nb.
Sent from my iPhone using Tapatalk
Could it be the TPS? Sorry don't have an nb.
Sent from my iPhone using Tapatalk
NA6 turbo - 140kw atw - not the most powerful but so much fun
- ED_MX5
- Fast Driver
- Posts: 342
- Joined: Sun Jun 01, 2014 1:32 pm
- Vehicle: NB8B
- Location: Sydney-northern beaches
Re: Engine flat spots
It is possible that it's the TPS. A bit of searching on the internet and you should be able to find resistance values for it. Then check that it is operating correctly with a multimeter. That may stop buying an expensive part for nothing. Have you checked ignition leads also, I remember you did plugs.
-PRAISE THE LOWERED-
-
- Driver
- Posts: 47
- Joined: Thu Oct 17, 2013 8:26 pm
- Vehicle: NB8B
- Location: Inverell
Re: Engine flat spots
Thanks for the help, I have found the fault it was a faulty oxygen sensor. I got a new one from mx5 mania ( great price also) and fitted it, now running good again.
-
- Fast Driver
- Posts: 393
- Joined: Tue Apr 06, 2010 10:53 pm
- Vehicle: NB8A
- Location: Newcastle (Woodberry)
Re: Engine flat spots
any chance you can send me the 4 pin plug off it with about 12'' of wire attached for ~$10.it would help me with wiring up a wideband.
Mick
Mick
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 71 guests