BEAVIS' White Track Car
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Re: BEAVIS' White Track Car
There will still be plenty of air above the flat floor.
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
- beavis
- Forum sponsor
- Posts: 1405
- Joined: Mon Feb 02, 2009 12:31 pm
- Vehicle: NB8B - Turbo
- Location: Melbourne
Re: BEAVIS' White Track Car
Hellmun wrote:Have you measured the gearbox and differential temps before/after? I'd be pretty concerned about cooking them with no ducts/radiators.
It's a consideration, but not a concern.
Turbo NB Build Thread | BeavisMotorsport.com | YouTube.com/bbeavis | Cars: NA6, NA8-VVT, NB-Turbo, ND-2L
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
Re: BEAVIS' White Track Car
looks ace.
what material for the floor etc?
what material for the floor etc?
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
- Hellmun
- Racing Driver
- Posts: 979
- Joined: Sat Feb 10, 2007 1:15 pm
- Vehicle: NB8B - Turbo
- Location: Wollongong,NSW
Re: BEAVIS' White Track Car
My diff was particularly chattery after the Wakefield 300 a few years ago. When I dropped the fluid out of concern the Royal purple diff oil had turned into apple juice...and that was with 90kw and no airflow obstruction. The redline in the gearbox was fine but we decided to do a little last minute weight reduction and pulled the carpet and centre console... transmission tunnel temperature was high enough to burn your hand after parking. I'll say everything is still working as I have both the same Diff/Trans now with a lot more power... extreme example as it's about 2 hours of tracktime but it shows that temperature is already just building up. I hope it's fine but it's on my 'nice to do' list to add diff/trans oil temperature sensors. They're about... $25 for the bosch motorsport ones. Unfortunately there's still quite a few items on my 'must fix' list before that.
- beavis
- Forum sponsor
- Posts: 1405
- Joined: Mon Feb 02, 2009 12:31 pm
- Vehicle: NB8B - Turbo
- Location: Melbourne
Re: BEAVIS' White Track Car
16bit wrote:looks ace.
what material for the floor etc?
It's an Alucobond type material.... with a coreflute style centre.
http://www.alucobond.com.au/
Hellmun wrote:My diff was particularly chattery ....
Hmm, thanks for the insight. I think if i ever did more than the 15min sessions I currently do, I could unbolt the floor as peace of mind.
Turbo NB Build Thread | BeavisMotorsport.com | YouTube.com/bbeavis | Cars: NA6, NA8-VVT, NB-Turbo, ND-2L
- lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Re: BEAVIS' White Track Car
New aero set up. Partly finished, but works well. Was making massive rooster tails in the wet sessions. So shows how well it is working.
image hosting over 5mb
Have to zoom in on the back of the car to see the spray of water. It wasn't as wet on the straight so is harder to see.
image hosting 10mb limit
image hosting over 5mb
Have to zoom in on the back of the car to see the spray of water. It wasn't as wet on the straight so is harder to see.
image hosting 10mb limit
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
- lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Re: BEAVIS' White Track Car
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
- lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Re: BEAVIS' White Track Car
Only problem with all the aero is the car looks like it is a full on race car. So many people get a surprise when they find out it just has a stock driveline and brakes.
image hosting 10mb limit
image hosting 10mb limit
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
- plohl
- Racing Driver
- Posts: 1922
- Joined: Wed Oct 14, 2009 12:13 am
- Vehicle: NA8
- Location: Brisbane
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
Re: BEAVIS' White Track Car
whats with the snowboard looking thing on the wing uprights?
flipped it.
flipped it.
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: BEAVIS' White Track Car
YES !
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
- Jeo
- Speed Racer
- Posts: 3648
- Joined: Thu Jun 26, 2008 9:33 am
- Vehicle: NB8B
- Location: Canberra
Re: BEAVIS' White Track Car
Winning.
- lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Re: BEAVIS' White Track Car
I think your are looking at the braces. The wing mounts need something to stop them swaying and flexing.
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
- lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Re: BEAVIS' White Track Car
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
- lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Re: BEAVIS' White Track Car
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
Who is online
Users browsing this forum: No registered users and 179 guests