Hey guys,
So I'm planning on installing some switches to run my car (99 nb8a). Two toggle switches for "Acc" and "On". A third momentary toggle for 'Start'.
I've figured out all the wires from the ignition barrel wiring, so that's no problem. I also know that I can drill out the steering lock mechanism so that's also no problem.
HOWEVER it wont start unless the key is in the ignition. Using ONLY the switches the car will start but it will die half a second later. Using the switches and just leaving the key in the ignition the car will run as normal. Even though the key isn't actually wired to anything
Is there a chip or something in the key that means it's necessary to be in the ignition? Is there anyway I can bypass the key being in there as that defeats the purpose?
Any help is appreciated.
Cheers in advance
keyless pushbutton start help!!
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Fast Driver
- Posts: 235
- Joined: Tue Jan 28, 2014 6:35 pm
- Vehicle: NB8A
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: keyless pushbutton start help!!
Yep there's a small chip in the key itself
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
- Fast Driver
- Posts: 235
- Joined: Tue Jan 28, 2014 6:35 pm
- Vehicle: NB8A
Re: keyless pushbutton start help!!
Hmm, surely there's a way to bypass this feature?
- tescoking
- Racing Driver
- Posts: 824
- Joined: Sat Dec 01, 2012 1:48 am
- Vehicle: NB8B
- Location: Perth, WA
Re: keyless pushbutton start help!!
I think one is to starter, one is to ignition, last one is earth. As long as the key is in the car then the car will armed
-
- Fast Driver
- Posts: 235
- Joined: Tue Jan 28, 2014 6:35 pm
- Vehicle: NB8A
Re: keyless pushbutton start help!!
Okay it seems that some people cut open there keys and remove the chip, then glue it to the ignition barrel. Now I just need to find out how to go about that
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: keyless pushbutton start help!!
I wonder how this all can be seen as a benefit- 3 toggle switches and drilling out ignition barrel and removing chip. Most of us also have 2 keys for obvious reasons. I do recall that the US site did have a system which did use a start button sourced from Honda spares- maybe take a look at that.
-
- Speed Racer
- Posts: 2189
- Joined: Fri Nov 29, 2013 8:51 am
- Vehicle: ND - RF
- Location: Sydney
Re: keyless pushbutton start help!!
Mr Morlock wrote:I do recall that the US site did have a system which did use a start button sourced from Honda spares- maybe take a look at that.
Here you go!
http://www.revlimiter.net/mods/nb_s2000_button.php
And here's what the boys from MCM doing it!
https://www.youtube.com/watch?v=5FBQwxm ... EFD6A9D4F9
"A Convertible has a top you can put down when the weather's nice...... A Roadster has a top you can put up when the weather's bad."
- tescoking
- Racing Driver
- Posts: 824
- Joined: Sat Dec 01, 2012 1:48 am
- Vehicle: NB8B
- Location: Perth, WA
Re: keyless pushbutton start help!!
I think he doesn't want to use the key at all and it is possible. However it take times to find out the cable also there are high risk of car being stolen.
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 17 guests