INSTALLER REQUIRED For HID NB8A Lights

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
tescoking
Racing Driver
Posts: 824
Joined: Sat Dec 01, 2012 1:48 am
Vehicle: NB8B
Location: Perth, WA

Re: INSTALLER REQUIRED For HID NB8A Lights

Postby tescoking » Sat May 17, 2014 2:16 am

Is just plug and play, open and have a look
My 5
Late 2000 Sunlight Silver NB8B
Image

User avatar
timk
Racing Driver
Posts: 1928
Joined: Fri Dec 31, 2004 3:16 pm
Vehicle: NC

Re: INSTALLER REQUIRED For HID NB8A Lights

Postby timk » Sat May 17, 2014 7:59 am

You probably don't want to hear this, and it might be out of line, but the previous owner had fitted a HID kit to my NB8A and it was horrible. Not only was the light output rubbish but it was dazzling and unsafe for oncoming cars, I got flashed all the time when I was on low beam.

I ended up swapping to some NB8B lights and they are "night and day difference". :lol:

I bought genuine ones but you can get some aftermarket ones fairly economically, they look similar to the SE lights:
http://www.mx5parts.co.uk/headlamp-blac ... -2411.html

Make sure you get ones designed for a RHD car or the cutoff line will be unsafe and illegal.

PT has a set of these aftermarket lights on his car:
http://mx5cartalk.com/forum/viewtopic.php?p=772805#p772805

Here is my NB8A after the NB8B light swap:
http://mx5cartalk.com/forum/viewtopic.php?p=771359#p771359

Cheers

User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

Re: INSTALLER REQUIRED For HID NB8A Lights

Postby green_comet » Sat May 17, 2014 10:08 am

If you're going to use NB8A lights at least do it right. Pull the housing apart and install a set of proper hid projectors along with a hid kit.

The retrofit source has everything you need to do it right.

http://www.theretrofitsource.com

The standard NB8A reflectors with a hid kit will be horrible and dangerous to other drivers on the road.

*waits for Morlock to reply*

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: INSTALLER REQUIRED For HID NB8A Lights

Postby Mr Morlock » Sat May 17, 2014 4:44 pm

What you are asking is fitting for an illegal product. Still an auto elect may do this and you pay their time. My local Ford workshop charges $132 per hour and an auto elect maybe $100. My guess min $50.

noobee
Fast Driver
Posts: 393
Joined: Tue Apr 06, 2010 10:53 pm
Vehicle: NB8A
Location: Newcastle (Woodberry)

Re: INSTALLER REQUIRED For HID NB8A Lights

Postby noobee » Sat May 17, 2014 6:08 pm

my friend has a pet peeve about this and also people who drive with their fog lights always on,its something that really bugs him,maybe his eyes are going bad.
being a local copper,when he's got time on nightshift he stops and books or defects as many as he can.usually when he pulls people over for HID's he generally finds a few other defects that would have otherwise gone unnoticed if these people hadn't self selected themselves.
Mick

User avatar
KAOS KARL
Learner Driver
Posts: 22
Joined: Sat Mar 22, 2014 2:58 am
Vehicle: NB8A
Location: NEWCASTLE

Re: INSTALLER REQUIRED For HID NB8A Lights

Postby KAOS KARL » Mon May 19, 2014 2:53 am

noobee wrote:my friend has a pet peeve about this and also people who drive with their fog lights always on,its something that really bugs him,maybe his eyes are going bad.
being a local copper,when he's got time on nightshift he stops and books or defects as many as he can.usually when he pulls people over for HID's he generally finds a few other defects that would have otherwise gone unnoticed if these people hadn't self selected themselves.
Mick


Thanks for your input Mike why does your copper mate Defect when in fact most new cars now have these lights ?
1998 NB8A Micra Green Hard Top
Simmons B45 Rims /Mania CAI/ Nitro Dann Exhaust/XForce Extractors

User avatar
Vat
Racing Driver
Posts: 891
Joined: Tue Dec 31, 2013 9:14 am
Vehicle: NB8A
Location: SW Brisbane

Re: INSTALLER REQUIRED For HID NB8A Lights

Postby Vat » Mon May 19, 2014 6:57 am

There's a legal difference between fog lights and daytime running lights, which is what most vehicles come with now after changes to the laws in Europe.

People who leave their rear fog lights on should have their eyes forced open and be made to stare at them for an hour.
'98 Evo Gold NB8A
QR-Clubman 66.5109|Sprint 63.3635|Sportsman 67.4673|National 92.3481|Lakeside 65.7478|MP K 1:35.382|MP E 1:16.422|NM 1:08.017

User avatar
smy0003
Racing Driver
Posts: 1870
Joined: Mon Dec 30, 2013 12:35 pm
Vehicle: NA8
Location: Melbourne

Re: INSTALLER REQUIRED For HID NB8A Lights

Postby smy0003 » Mon May 19, 2014 10:43 am

I'd argue the 'most new cars claim' and then argue that a light cluster designed for HIDs and some after market jobby aren't really comparable.

You'll find that not many (read: nobody) on here like HIDs at all.
Like MCM say, it stands for 'Hello, I'm a D*** ****.'

If you want more light and/or an improved look, have a look at decent second hand or aftermarket lights.

If your just after some cosmetic changes, have you considered painting the non-reflector internal parts of your standard lights?
It looks great on NBs.

[EDIT]
I want to stress that no one on here is having a go at you, buddy. Mx-5's enjoy a reputation as a sensible car, and as such we don't really have the same problems that the Nissan and Mitsu guys do. It's one of the best parts of the car, and I wouldn't want you to end up defected over something as silly as lights.
If you're going to get defected, make sure it's for a turbo :twisted:

Welcome to the forum!




Sent from my GT-I9100 using Tapatalk
Last edited by smy0003 on Mon May 19, 2014 11:08 am, edited 1 time in total.
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8

emily_mx5
Racing Driver
Posts: 1720
Joined: Wed Aug 03, 2011 5:57 pm
Vehicle: NB SE
Location: Sydney

Re: INSTALLER REQUIRED For HID NB8A Lights

Postby emily_mx5 » Mon May 19, 2014 10:50 am

Where is Mr. M when you need him.
You cannot think that just because new cars have things, that they are legal to be put on your older car.

OP, either retrofit later model headlights (and bumper) that use projector beams, hids will work in them.
Or cut your headlights open and fit a projector unit. Then put hids.
Someone in America did it, and painted it black, looked great.


Sent from my iPhone using Tapatalk


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 90 guests