INSTALLER REQUIRED For HID NB8A Lights
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- tescoking
- Racing Driver
- Posts: 824
- Joined: Sat Dec 01, 2012 1:48 am
- Vehicle: NB8B
- Location: Perth, WA
Re: INSTALLER REQUIRED For HID NB8A Lights
Is just plug and play, open and have a look
- timk
- Racing Driver
- Posts: 1928
- Joined: Fri Dec 31, 2004 3:16 pm
- Vehicle: NC
Re: INSTALLER REQUIRED For HID NB8A Lights
You probably don't want to hear this, and it might be out of line, but the previous owner had fitted a HID kit to my NB8A and it was horrible. Not only was the light output rubbish but it was dazzling and unsafe for oncoming cars, I got flashed all the time when I was on low beam.
I ended up swapping to some NB8B lights and they are "night and day difference".
I bought genuine ones but you can get some aftermarket ones fairly economically, they look similar to the SE lights:
http://www.mx5parts.co.uk/headlamp-blac ... -2411.html
Make sure you get ones designed for a RHD car or the cutoff line will be unsafe and illegal.
PT has a set of these aftermarket lights on his car:
http://mx5cartalk.com/forum/viewtopic.php?p=772805#p772805
Here is my NB8A after the NB8B light swap:
http://mx5cartalk.com/forum/viewtopic.php?p=771359#p771359
Cheers
I ended up swapping to some NB8B lights and they are "night and day difference".
I bought genuine ones but you can get some aftermarket ones fairly economically, they look similar to the SE lights:
http://www.mx5parts.co.uk/headlamp-blac ... -2411.html
Make sure you get ones designed for a RHD car or the cutoff line will be unsafe and illegal.
PT has a set of these aftermarket lights on his car:
http://mx5cartalk.com/forum/viewtopic.php?p=772805#p772805
Here is my NB8A after the NB8B light swap:
http://mx5cartalk.com/forum/viewtopic.php?p=771359#p771359
Cheers
- green_comet
- Car Detailing Guru
- Posts: 1848
- Joined: Tue May 24, 2005 1:41 am
- Vehicle: NA8
- Location: Melbourne
Re: INSTALLER REQUIRED For HID NB8A Lights
If you're going to use NB8A lights at least do it right. Pull the housing apart and install a set of proper hid projectors along with a hid kit.
The retrofit source has everything you need to do it right.
http://www.theretrofitsource.com
The standard NB8A reflectors with a hid kit will be horrible and dangerous to other drivers on the road.
*waits for Morlock to reply*
The retrofit source has everything you need to do it right.
http://www.theretrofitsource.com
The standard NB8A reflectors with a hid kit will be horrible and dangerous to other drivers on the road.
*waits for Morlock to reply*
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: INSTALLER REQUIRED For HID NB8A Lights
What you are asking is fitting for an illegal product. Still an auto elect may do this and you pay their time. My local Ford workshop charges $132 per hour and an auto elect maybe $100. My guess min $50.
-
- Fast Driver
- Posts: 393
- Joined: Tue Apr 06, 2010 10:53 pm
- Vehicle: NB8A
- Location: Newcastle (Woodberry)
Re: INSTALLER REQUIRED For HID NB8A Lights
my friend has a pet peeve about this and also people who drive with their fog lights always on,its something that really bugs him,maybe his eyes are going bad.
being a local copper,when he's got time on nightshift he stops and books or defects as many as he can.usually when he pulls people over for HID's he generally finds a few other defects that would have otherwise gone unnoticed if these people hadn't self selected themselves.
Mick
being a local copper,when he's got time on nightshift he stops and books or defects as many as he can.usually when he pulls people over for HID's he generally finds a few other defects that would have otherwise gone unnoticed if these people hadn't self selected themselves.
Mick
- KAOS KARL
- Learner Driver
- Posts: 22
- Joined: Sat Mar 22, 2014 2:58 am
- Vehicle: NB8A
- Location: NEWCASTLE
Re: INSTALLER REQUIRED For HID NB8A Lights
noobee wrote:my friend has a pet peeve about this and also people who drive with their fog lights always on,its something that really bugs him,maybe his eyes are going bad.
being a local copper,when he's got time on nightshift he stops and books or defects as many as he can.usually when he pulls people over for HID's he generally finds a few other defects that would have otherwise gone unnoticed if these people hadn't self selected themselves.
Mick
Thanks for your input Mike why does your copper mate Defect when in fact most new cars now have these lights ?
1998 NB8A Micra Green Hard Top
Simmons B45 Rims /Mania CAI/ Nitro Dann Exhaust/XForce Extractors
Simmons B45 Rims /Mania CAI/ Nitro Dann Exhaust/XForce Extractors
- Vat
- Racing Driver
- Posts: 891
- Joined: Tue Dec 31, 2013 9:14 am
- Vehicle: NB8A
- Location: SW Brisbane
Re: INSTALLER REQUIRED For HID NB8A Lights
There's a legal difference between fog lights and daytime running lights, which is what most vehicles come with now after changes to the laws in Europe.
People who leave their rear fog lights on should have their eyes forced open and be made to stare at them for an hour.
People who leave their rear fog lights on should have their eyes forced open and be made to stare at them for an hour.
'98 Evo Gold NB8A
QR-Clubman 66.5109|Sprint 63.3635|Sportsman 67.4673|National 92.3481|Lakeside 65.7478|MP K 1:35.382|MP E 1:16.422|NM 1:08.017
QR-Clubman 66.5109|Sprint 63.3635|Sportsman 67.4673|National 92.3481|Lakeside 65.7478|MP K 1:35.382|MP E 1:16.422|NM 1:08.017
- smy0003
- Racing Driver
- Posts: 1870
- Joined: Mon Dec 30, 2013 12:35 pm
- Vehicle: NA8
- Location: Melbourne
Re: INSTALLER REQUIRED For HID NB8A Lights
I'd argue the 'most new cars claim' and then argue that a light cluster designed for HIDs and some after market jobby aren't really comparable.
You'll find that not many (read: nobody) on here like HIDs at all.
Like MCM say, it stands for 'Hello, I'm a D*** ****.'
If you want more light and/or an improved look, have a look at decent second hand or aftermarket lights.
If your just after some cosmetic changes, have you considered painting the non-reflector internal parts of your standard lights?
It looks great on NBs.
[EDIT]
I want to stress that no one on here is having a go at you, buddy. Mx-5's enjoy a reputation as a sensible car, and as such we don't really have the same problems that the Nissan and Mitsu guys do. It's one of the best parts of the car, and I wouldn't want you to end up defected over something as silly as lights.
If you're going to get defected, make sure it's for a turbo
Welcome to the forum!
Sent from my GT-I9100 using Tapatalk
You'll find that not many (read: nobody) on here like HIDs at all.
Like MCM say, it stands for 'Hello, I'm a D*** ****.'
If you want more light and/or an improved look, have a look at decent second hand or aftermarket lights.
If your just after some cosmetic changes, have you considered painting the non-reflector internal parts of your standard lights?
It looks great on NBs.
[EDIT]
I want to stress that no one on here is having a go at you, buddy. Mx-5's enjoy a reputation as a sensible car, and as such we don't really have the same problems that the Nissan and Mitsu guys do. It's one of the best parts of the car, and I wouldn't want you to end up defected over something as silly as lights.
If you're going to get defected, make sure it's for a turbo
Welcome to the forum!
Sent from my GT-I9100 using Tapatalk
Last edited by smy0003 on Mon May 19, 2014 11:08 am, edited 1 time in total.
[b]Then: Sunlight Silver NB8B
Now: Chaste White NA8
Now: Chaste White NA8
-
- Racing Driver
- Posts: 1720
- Joined: Wed Aug 03, 2011 5:57 pm
- Vehicle: NB SE
- Location: Sydney
Re: INSTALLER REQUIRED For HID NB8A Lights
Where is Mr. M when you need him.
You cannot think that just because new cars have things, that they are legal to be put on your older car.
OP, either retrofit later model headlights (and bumper) that use projector beams, hids will work in them.
Or cut your headlights open and fit a projector unit. Then put hids.
Someone in America did it, and painted it black, looked great.
Sent from my iPhone using Tapatalk
You cannot think that just because new cars have things, that they are legal to be put on your older car.
OP, either retrofit later model headlights (and bumper) that use projector beams, hids will work in them.
Or cut your headlights open and fit a projector unit. Then put hids.
Someone in America did it, and painted it black, looked great.
Sent from my iPhone using Tapatalk
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 106 guests