Possible mods for tall drivers in a NA6?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Speed Racer
- Posts: 3471
- Joined: Sun Jan 19, 2014 9:52 am
- Vehicle: NA6
- Location: Lugarno, Sydney
Possible mods for tall drivers in a NA6?
Hi all,
I'm 6 foot 3, love MX5's but don't fit as well as I'd like.
My head sits above the headrest and if I rake the seat right back, I need to hunch forward to reach the wheel.
Are there such thing as steering wheel spacers? Ideally I want it spaced back a further 30mm. My fingers are still long enough to reach the wipers etc.
Any seat options that sit lower than the standard NA6 seats?
I've removed the sun visors for some extra visibility and wonder what else I can do?
Thanks,
S
I'm 6 foot 3, love MX5's but don't fit as well as I'd like.
My head sits above the headrest and if I rake the seat right back, I need to hunch forward to reach the wheel.
Are there such thing as steering wheel spacers? Ideally I want it spaced back a further 30mm. My fingers are still long enough to reach the wipers etc.
Any seat options that sit lower than the standard NA6 seats?
I've removed the sun visors for some extra visibility and wonder what else I can do?
Thanks,
S
NA6 turbo - 140kw atw - not the most powerful but so much fun
- Bauer
- Fast Driver
- Posts: 349
- Joined: Thu Dec 10, 2009 8:49 pm
- Vehicle: NB8A
- Location: Launceston, Tas
Re: Possible mods for tall drivers in a NA6?
search "foamectomy" I did that. Removes foam from the seat back and base.
I also shortened the dead pedal and when I fitted a smaller steering wheel, I found legroom.
Im 6'2 and had no issues after I did all that.
I also shortened the dead pedal and when I fitted a smaller steering wheel, I found legroom.
Im 6'2 and had no issues after I did all that.
cheers
Stu
Stu
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Possible mods for tall drivers in a NA6?
As above, you can cut some foam out of the seat base to add to headroom.
As far as steering wheel, for the NA6/8 you can buy either an extended boss, or an extension for the stock one (a spacer that you use with longer bolts)
Here's one of the extenders, just google "steering boss extension" or something along those lines. Try to get a decent one, steering, important etc.
An extended boss looks just like the factory steering boss, only longer. Personally, this would be my preference (one piece, less points to fail in accident)
As far as steering wheel, for the NA6/8 you can buy either an extended boss, or an extension for the stock one (a spacer that you use with longer bolts)
Here's one of the extenders, just google "steering boss extension" or something along those lines. Try to get a decent one, steering, important etc.
An extended boss looks just like the factory steering boss, only longer. Personally, this would be my preference (one piece, less points to fail in accident)
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
-
- Speed Racer
- Posts: 3471
- Joined: Sun Jan 19, 2014 9:52 am
- Vehicle: NA6
- Location: Lugarno, Sydney
Re: Possible mods for tall drivers in a NA6?
Bauer wrote:search "foamectomy" I did that. Removes foam from the seat back and base.
I also shortened the dead pedal and when I fitted a smaller steering wheel, I found legroom.
Im 6'2 and had no issues after I did all that.
Stu, how do you find the comfort with less foam?
I want to use the standard wheel size so I can see the dials.
Any room to lower the frame/rails? I guess it all counts ;)
hks_kansei wrote:As above, you can cut some foam out of the seat base to add to headroom.
As far as steering wheel, for the NA6/8 you can buy either an extended boss, or an extension for the stock one (a spacer that you use with longer bolts)
Here's one of the extenders, just google "steering boss extension" or something along those lines. Try to get a decent one, steering, important etc.
An extended boss looks just like the factory steering boss, only longer. Personally, this would be my preference (one piece, less points to fail in accident)
Kansei, I agree, steering is important!
Would also prefer the extended boss.
Thank you both for your input - Most appreciated
NA6 turbo - 140kw atw - not the most powerful but so much fun
- Beelzeboss
- Fast Driver
- Posts: 323
- Joined: Tue May 03, 2011 3:59 pm
- Vehicle: Non MX-5
- Location: Sydney
- Contact:
Re: Possible mods for tall drivers in a NA6?
Bringing the steering wheel closer gave me the biggest boost in legroom of any mod I've done to my car, but I teamed it with a slightly smaller wheel. I also chopped tonnes of foam from the base of the seat. I'm 6'5" and fit pretty well in my car. I don't notice the seat being any less comfortable than the passenger seat which has all the original foam. In fact, since the modded one is more like a bucket I find it more comfortable.
- speed freak
- Racing Driver
- Posts: 873
- Joined: Sun Mar 10, 2013 6:39 pm
- Vehicle: NB8B
- Location: Gold Coast
Re: Possible mods for tall drivers in a NA6?
Haha join the club. Im tall and I use mine daily. Iv actually been contemplating on selling it because of this reason, because I need to hunch over my neck and back gets sore.
I done the foamectomy which did help but still didnt give me enough headroom to be comfortable in.
I took a NB for a drive today with a Sparco Sprint V bucket seat and its worlds apart from the stock seat. I could for once sit up dead straight in the seat and with the roof up I still had about 1-2 inches of headroom. ATM in my nb8b I cant sit up straight and my head still sits on the roof.
Id try the foamectomy but if that doesnt help enough look at getting a sparco seat, sit much lower in the seat and its great for tall people too more so if you have long legs because, you sit low in the seat your legs go up and over the edge which is good.
I done the foamectomy which did help but still didnt give me enough headroom to be comfortable in.
I took a NB for a drive today with a Sparco Sprint V bucket seat and its worlds apart from the stock seat. I could for once sit up dead straight in the seat and with the roof up I still had about 1-2 inches of headroom. ATM in my nb8b I cant sit up straight and my head still sits on the roof.
Id try the foamectomy but if that doesnt help enough look at getting a sparco seat, sit much lower in the seat and its great for tall people too more so if you have long legs because, you sit low in the seat your legs go up and over the edge which is good.
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: Possible mods for tall drivers in a NA6?
what else can you do- well you could consider changing the car- and the NC is likely to be far more suitable. If you spend much time in the car then a compromised driving position and lack of support is not going to do a tall driver any favours.Mazda engineers on their own admission said the NA was not made for bigger guys and added a "sorry" as well. Suggestion is drive an NC and see the difference. There is a cost difference of course but you get something in return apart from just the comfort, safety and usability aspects.
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: Possible mods for tall drivers in a NA6?
Beelzeboss wrote:Bringing the steering wheel closer gave me the biggest boost in legroom of any mod I've done to my car, but I teamed it with a slightly smaller wheel. I also chopped tonnes of foam from the base of the seat. I'm 6'5" and fit pretty well in my car. I don't notice the seat being any less comfortable than the passenger seat which has all the original foam. In fact, since the modded one is more like a bucket I find it more comfortable.
Yes Andrew is living proof anyone can fit in a NA you are one tall bastard
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
- Racing Driver
- Posts: 750
- Joined: Mon Jul 29, 2013 8:47 pm
- Vehicle: NC
- Location: Sydney
Re: Possible mods for tall drivers in a NA6?
I am 6'3" also and tried the NA and decided the NB was a better fit for me.
I have tried a few things to improve the feel of sitting in the car than sitting on the car.
Foamectomy worked well and improved the driving position.
The Sparco Sprint V seat is a great option and really improves the proportions of legs out to arm reach. I swap the seats in and out depending on what driving I am doing.
I also fitted a shorter foot rest that allows my left leg to sit a little lower. http://shop.jassperformance.com/index.php?route=product/product&path=59_52&product_id=128
Good luck.
I have tried a few things to improve the feel of sitting in the car than sitting on the car.
Foamectomy worked well and improved the driving position.
The Sparco Sprint V seat is a great option and really improves the proportions of legs out to arm reach. I swap the seats in and out depending on what driving I am doing.
I also fitted a shorter foot rest that allows my left leg to sit a little lower. http://shop.jassperformance.com/index.php?route=product/product&path=59_52&product_id=128
Good luck.
NB8A| WP 1:15.6 | SMP-S 1:08.56 | SMP-N 1:21.35
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288
- Okibi
- Speed Racer
- Posts: 10901
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re: Possible mods for tall drivers in a NA6?
6'2" here, if you do the foamectomy, some recommend cutting the foam out of the top, DON'T DO THIS, cut the foam out of the bottom, that way the seat still looks like standard when you're not sitting in it but it will sink down further.
This is a pretty cheap fix and easy to do.
You could also look at getting some later NB seats as the NA seats are rubbish for tall people.
If you want to spend a little more a race seat on a good bracket will get you as low as possible but not great for driving really long distances.
This is a pretty cheap fix and easy to do.
You could also look at getting some later NB seats as the NA seats are rubbish for tall people.
If you want to spend a little more a race seat on a good bracket will get you as low as possible but not great for driving really long distances.
If you had access to a car like this, would you take it back right away? Neither would I.
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: Possible mods for tall drivers in a NA6?
^ Yup, Dave knows ... I have a pair if SE seats in my NB that I bought from him and the driver's seat that he did the foamectomy on is great ...
Sent from my GT-I9100T using Tapatalk
Sent from my GT-I9100T using Tapatalk
-
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: Possible mods for tall drivers in a NA6?
Go to somewhere like Revolution Racegear and try sitting in a Sparco Sprint seat. If you do fit into it OK then go home and take out your drivers seat and make up a pad of old towels or something like that about an inch thick. Place that on the floor and sit on it. That's about where you can set up a Sparco with side mounts at the lowest setting.
I've got a Sparco on custom mounts that lowers me almost 3". To me that's the difference between staring at the sun visor and looking straight through the centre of the windscreen.
I've got a Sparco on custom mounts that lowers me almost 3". To me that's the difference between staring at the sun visor and looking straight through the centre of the windscreen.
’95 NA8
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: Possible mods for tall drivers in a NA6?
Another thought is mounting the Sparco's direct to the floor, you will loose adjustability but will also gain another 1" or so.
I did a 900km drive in a Sparco Sprint and did not suffer any discomfort.
I did a 900km drive in a Sparco Sprint and did not suffer any discomfort.
-
- Speed Racer
- Posts: 3471
- Joined: Sun Jan 19, 2014 9:52 am
- Vehicle: NA6
- Location: Lugarno, Sydney
Re: Possible mods for tall drivers in a NA6?
Thank you all for your suggestions.
Will start with the steering wheel then Suss out the Sparco's.
Who could complain about an extra 3 inches
Sent from my iPhone using Tapatalk
Will start with the steering wheel then Suss out the Sparco's.
Who could complain about an extra 3 inches
Sent from my iPhone using Tapatalk
NA6 turbo - 140kw atw - not the most powerful but so much fun
-
- Fast Driver
- Posts: 290
- Joined: Wed Dec 11, 2013 11:24 pm
- Vehicle: NA6
- Location: Gold Coast
Re: Possible mods for tall drivers in a NA6?
I'm 6'2" and I fit no problem :/ is there something wrong here
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 37 guests