Before I get under the car thought I would ask for some suggestions as to what could be causing a single loud clunk from the front when hard cornering on the track. No such noise in regular road driving.
I am thinking sway bars. Thoughts?
Car has BC racing coilovers. A common problem is the locking nut comes loose. Checked it and bolts on the upper mounts and they are all tight.
Sent from my HTC One X using Tapatalk
Loud single clunk hard turns only
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- YanMa YatTai
- Fast Driver
- Posts: 219
- Joined: Wed Nov 02, 2011 11:07 pm
- Vehicle: NA6
- Location: Sydney
-
- Fast Driver
- Posts: 235
- Joined: Tue Jan 28, 2014 6:35 pm
- Vehicle: NB8A
Re: Loud single clunk hard turns only
cornering in both directions?
maybe upper control arm contacting sway bar?
maybe upper control arm contacting sway bar?
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: Loud single clunk hard turns only
I found that, at least in my case that the adjustable sway bar and end links would contact the perch adjuster ring in certain situations when the bar was set on full soft.
- YanMa YatTai
- Fast Driver
- Posts: 219
- Joined: Wed Nov 02, 2011 11:07 pm
- Vehicle: NA6
- Location: Sydney
Re: Loud single clunk hard turns only
Yep, both directions. Only started happening after an off track excursion. Sways are stock and never previously made noise. I think something has come loose.
Sent from my HTC One X using Tapatalk
Sent from my HTC One X using Tapatalk
-
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: Loud single clunk hard turns only
Worn/damaged control arm bush, probably one of the lower ones, or else a worn/damaged control arm ball joint, also probably a lower one.
’95 NA8
-
- Fast Driver
- Posts: 204
- Joined: Tue Sep 22, 2009 7:28 pm
- Vehicle: NA6 - Turbo
- Location: NSW South Coast
Re: Loud single clunk hard turns only
Broken sway bar mount , the bracket that mounts it to the chassis
Have a look at the eccentric bolts that you use to adjust camber
sometimes they come a bit lose and can slop back and forth causing a loud click sound
you might have to adjust the eccentric washer 180 deg so it points up rather than down
you can usually tell if it's been moving, It'll have a shiny bit beside the washer
Also have a look at the rear mount for the front lower control arm sometimes you get a stone in it and it clicks
Olboy
Have a look at the eccentric bolts that you use to adjust camber
sometimes they come a bit lose and can slop back and forth causing a loud click sound
you might have to adjust the eccentric washer 180 deg so it points up rather than down
you can usually tell if it's been moving, It'll have a shiny bit beside the washer
Also have a look at the rear mount for the front lower control arm sometimes you get a stone in it and it clicks
Olboy
- D.A.M
- Fast Driver
- Posts: 465
- Joined: Sat Aug 13, 2011 1:48 pm
- Vehicle: NA6
- Location: Brisbane
Re: Loud single clunk hard turns only
got the same issue!!!
- YanMa YatTai
- Fast Driver
- Posts: 219
- Joined: Wed Nov 02, 2011 11:07 pm
- Vehicle: NA6
- Location: Sydney
Re: Loud single clunk hard turns only
Well nothing looks broken. Tried to Wobble wheels and they don't budge. Sway endlinks and mounts all fine. No noise on slow speeds, reverse, full lock. Nothing.
Then tried some enthusiastic driving. Nothing.
Then after a hard right I quickly went left. A creaking sound. Worked out noise only occurs after hard corner then a dramatic shift in another direction including heavy braking. On track it clunks. On road it's more like a soft creak.
Sent from my HTC One X using Tapatalk
Then tried some enthusiastic driving. Nothing.
Then after a hard right I quickly went left. A creaking sound. Worked out noise only occurs after hard corner then a dramatic shift in another direction including heavy braking. On track it clunks. On road it's more like a soft creak.
Sent from my HTC One X using Tapatalk
- kalt
- Fast Driver
- Posts: 380
- Joined: Wed Jan 01, 2014 9:44 pm
- Vehicle: NB8B
- Location: Vic
- Contact:
Re: Loud single clunk hard turns only
I get the same thing, thinking it's the spring perch.
Jack a wheel up then drop it down again, makes the same noise right?
Jack a wheel up then drop it down again, makes the same noise right?
- YanMa YatTai
- Fast Driver
- Posts: 219
- Joined: Wed Nov 02, 2011 11:07 pm
- Vehicle: NA6
- Location: Sydney
Re: Loud single clunk hard turns only
Yeah sounds like the perch at slower speeds but sounds bad on the track with a pretty solid clunk! There is roughly 4-5mm preload on the spring so it isn't exactly flopping about.
Hoping that's all it is.
Sent from my HTC One X using Tapatalk
Hoping that's all it is.
Sent from my HTC One X using Tapatalk
- YanMa YatTai
- Fast Driver
- Posts: 219
- Joined: Wed Nov 02, 2011 11:07 pm
- Vehicle: NA6
- Location: Sydney
Re: Loud single clunk hard turns only
Pretty sure it's coil bind on spring perch. Just Jap recommend backing off preload a little.
Sent from my HTC One X using Tapatalk
Sent from my HTC One X using Tapatalk
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: Loud single clunk hard turns only
To check for an uncaptive spring, put the car up on stands and allow the wheels to reach full droop (disconnect the sway bars), simple test.
If it is when cornering on the limits could it be the bumpstops?
If it is when cornering on the limits could it be the bumpstops?
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: Loud single clunk hard turns only
Endlinks are consumables so I'm betting one is worn.
Try swapping them to the other side to see if the clunk moves accordingly.
Sent from my HTC One using Tapatalk
Try swapping them to the other side to see if the clunk moves accordingly.
Sent from my HTC One using Tapatalk
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 214 guests