So I find myself in the position where I think the NB8A fuel pressure reg is dying. I'm seeing idle pressure of 94psi, free-revving the engine to 4k RPM sees a drop to 88psi... then after a drive last night the pressure dropped to 70psi . This screams it's time for an aftermarket FPR but I can't seem to confirm what adapter we use. Anyone know for sure what adapter we need? I found an old post from CT in 2006 that says SARD Mitsubishi....
For reference car the car is far from stock. Important bits are Bosche 044 pump running to a NB8A rail on an NB8B manifold. NB8A return line installed in an NB8B feeding back to a surge tank.
Fuel Rail adapter
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
-
Hellmun
- Racing Driver
- Posts: 979
- Joined: Sat Feb 10, 2007 1:15 pm
- Vehicle: NB8B - Turbo
- Location: Wollongong,NSW
-
Hellmun
- Racing Driver
- Posts: 979
- Joined: Sat Feb 10, 2007 1:15 pm
- Vehicle: NB8B - Turbo
- Location: Wollongong,NSW
Re: Fuel Rail adapter
SARD P/n SARD69014 needs the holes elongated to fit.
You do not have the required permissions to view the files attached to this post.
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: Google [Bot] and 113 guests
