Drivers Door won't lock from inside - Plastic Clip Broken

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

booki89
Fast Driver
Posts: 191
Joined: Sat Dec 28, 2013 3:56 pm
Vehicle: NA8
Location: Melbourne

Drivers Door won't lock from inside - Plastic Clip Broken

Postby booki89 » Sun Feb 23, 2014 10:04 pm

Hey all,

Slowly going through my MX5 fixing everything, and the drivers side door won't lock from inside the cabin. Locks fine with the key though.

I took off the trim and looks like that the plastic piece the lock connects too has broken,
Its the yellow piece in this picture.

http://mx-5.sabretooth.id.au/interior/d ... sshole.jpg

Any ideas on where to get one? Or what they are called?

And do you think it would be a RWC issue...I can't see anything about it in the PDF on vicroads website

http://www.vicroads.vic.gov.au/NR/rdonl ... I26web.pdf

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: Drivers Door won't lock from inside - Plastic Clip Broke

Postby hks_kansei » Mon Feb 24, 2014 10:06 am

Not sure if it's a RWC issue, I know the doorhandles must work, but not sure if the lock needs to?

as for the part, it's probably simpler to buy a replacement door handle, places normally won't sell just a little bit like that on it's own.


Or try a wrecking yard, the part was likely used on other Mazdas.

Imlach's on Centre road have always been good to me, and they have a decent range.
Or Allmaz for any MX5 specific bits.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

93_Clubman
Speed Racer
Posts: 11856
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Drivers Door won't lock from inside - Plastic Clip Broke

Postby 93_Clubman » Mon Feb 24, 2014 10:07 am

Depending on where you are in Melb, Allmaz, 492 Clayton Rd, Clayton, 9544 7044, or contact a forumite that has advertised wrecking their NA. Re RWC, I'd be very surprised if they check if the inside slide locks the door from the inside.

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Drivers Door won't lock from inside - Plastic Clip Broke

Postby Mr Morlock » Mon Feb 24, 2014 10:21 am

first point of call is Mazda spare parts to see if the items is serviced- don't assume they do not carry it. They will look up the schematics to id the p/nbr.It look to me as a standalone component.

Wreckers of course but some are not very helpful for small items. It looks like a right angle retainer- there is some chance that a similiar or similar item is procurable- maybe on line or maybe try Bursons for a lead. Its even possible its repairable.

I cannot see it being a rwc issue and who is going to check it anyway.

noobee
Fast Driver
Posts: 393
Joined: Tue Apr 06, 2010 10:53 pm
Vehicle: NB8A
Location: Newcastle (Woodberry)

Re: Drivers Door won't lock from inside - Plastic Clip Broke

Postby noobee » Mon Feb 24, 2014 10:32 am

important that it unlocks from the inside(especially if car is burning,as happened to my cousin).these clips are used on many cars,I used Hyundai ones on mine,bought from the local ford dealership,around $3 from memory.
Mick

booki89
Fast Driver
Posts: 191
Joined: Sat Dec 28, 2013 3:56 pm
Vehicle: NA8
Location: Melbourne

Re: Drivers Door won't lock from inside - Plastic Clip Broke

Postby booki89 » Mon Feb 24, 2014 9:23 pm

Any idea's of part numbers or something?

I am not sure how to describe it to a dealer. "I need the plastic thingy that locks my doors"

myredmx5
Fast Driver
Posts: 498
Joined: Fri Mar 02, 2012 5:13 pm
Vehicle: NA8
Location: Newcastle Area NSW

Re: Drivers Door won't lock from inside - Plastic Clip Broke

Postby myredmx5 » Mon Feb 24, 2014 11:03 pm


booki89
Fast Driver
Posts: 191
Joined: Sat Dec 28, 2013 3:56 pm
Vehicle: NA8
Location: Melbourne

Re: Drivers Door won't lock from inside - Plastic Clip Broke

Postby booki89 » Mon Feb 24, 2014 11:18 pm

Thanks so much!!

That picture will help me heaps!

Least now I can go into shops and ask for number 9 :)

myredmx5
Fast Driver
Posts: 498
Joined: Fri Mar 02, 2012 5:13 pm
Vehicle: NA8
Location: Newcastle Area NSW

Re: Drivers Door won't lock from inside - Plastic Clip Broke

Postby myredmx5 » Sun Apr 13, 2014 10:17 am

Did you manage to get the clip?

booki89
Fast Driver
Posts: 191
Joined: Sat Dec 28, 2013 3:56 pm
Vehicle: NA8
Location: Melbourne

Re: Drivers Door won't lock from inside - Plastic Clip Broke

Postby booki89 » Sun Apr 13, 2014 10:21 am

I ended up going to a buddies house, he had seen it before.
Checked my door out and the clip wasn't broken.

Just had come out, so he popped it in and all good since!


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 171 guests