NA8 Start Up Procedure

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

myredmx5
Fast Driver
Posts: 498
Joined: Fri Mar 02, 2012 5:13 pm
Vehicle: NA8
Location: Newcastle Area NSW

NA8 Start Up Procedure

Postby myredmx5 » Wed Mar 12, 2014 10:07 pm

My NA8 won't start first time.

Is the fuel pump supposed to pump when the key is switched on as mine doesn't but does on the second and subsequent times.

What do I need to check?

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: NA8 Start Up Procedure

Postby 93_Clubman » Wed Mar 12, 2014 11:13 pm

This started the same way:
viewtopic.php?f=55&t=46425

Also, failing 'Fuel Inj' relay in engine bay fuse box can have a similar affect.

myredmx5
Fast Driver
Posts: 498
Joined: Fri Mar 02, 2012 5:13 pm
Vehicle: NA8
Location: Newcastle Area NSW

Re: NA8 Start Up Procedure

Postby myredmx5 » Thu Mar 13, 2014 9:07 am

Is the fuel pump supposed to pump when the key is switched on before engaging the starter motor?

ralt
Fast Driver
Posts: 423
Joined: Thu May 19, 2011 11:10 am
Vehicle: ND - 2
Location: brisbane

Re: NA8 Start Up Procedure

Postby ralt » Thu Mar 13, 2014 9:29 am

Hi.
Yes as soon as you turn the ignition on the pump starts to pressurise the fuel rail.

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: NA8 Start Up Procedure

Postby 93_Clubman » Thu Mar 13, 2014 10:02 am

As Ralt says, but it won't necessarily be audible - it isn't on my NA8, which hasn't been changed from factory in that area.

Btw, thought you were indicating above it was audible on second & subsequent ignition turns.

myredmx5
Fast Driver
Posts: 498
Joined: Fri Mar 02, 2012 5:13 pm
Vehicle: NA8
Location: Newcastle Area NSW

Re: NA8 Start Up Procedure

Postby myredmx5 » Thu Mar 13, 2014 5:55 pm

ralt wrote:Hi.
Yes as soon as you turn the ignition on the pump starts to pressurise the fuel rail.
Thanks 'ralt'. What do I need to look at to fix this?

myredmx5
Fast Driver
Posts: 498
Joined: Fri Mar 02, 2012 5:13 pm
Vehicle: NA8
Location: Newcastle Area NSW

Re: NA8 Start Up Procedure

Postby myredmx5 » Wed Apr 02, 2014 10:59 am

93_Clubman wrote:As Ralt says, but it won't necessarily be audible - it isn't on my NA8, which hasn't been changed from factory in that area.

Btw, thought you were indicating above it was audible on second & subsequent ignition turns.
Here's a fresh explanation.

Switch ignition key on = no sound from pump = try to start = does not fire within 5 seconds = switch ignition on = can hear the pump = try to start = does not within 5 seconds.

I go through this procedure several times and then it fires up.

Are there any items I should check. I have removed the pump and replaced the filter and there appears to be no blockages at those points.

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: NA8 Start Up Procedure

Postby 93_Clubman » Thu Apr 03, 2014 10:02 am

93_Clubman wrote:This started the same way:
viewtopic.php?f=55&t=46425

Also, failing 'Fuel Inj' relay in engine bay fuse box can have a similar affect.

myredmx5
Fast Driver
Posts: 498
Joined: Fri Mar 02, 2012 5:13 pm
Vehicle: NA8
Location: Newcastle Area NSW

Re: NA8 Start Up Procedure

Postby myredmx5 » Thu Apr 03, 2014 12:14 pm

Tried substitution of said relay with no effect.

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: NA8 Start Up Procedure

Postby 93_Clubman » Thu Apr 03, 2014 2:24 pm

myredmx5 wrote:Tried substitution of said relay with no effect.

What about checking if the so called 'black wire' issue is present as per the above link, ie: viewtopic.php?f=55&t=46425

It's also possible there's an intermittent issue with the fuel pump relay under the dash on the driver side.

Might also be an issue with ECU - Conti in Darwin had an onging issue with his NA8 Clubman, which he finally identified as ECU components: viewtopic.php?f=73&t=41675&p=535710#p535710

Also worth checking all earth points.

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: NA8 Start Up Procedure

Postby project.r.racing » Thu Apr 03, 2014 9:22 pm

pump in tank is buggered or wiring in tank is buggered.


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 88 guests