My NA8 won't start first time.
Is the fuel pump supposed to pump when the key is switched on as mine doesn't but does on the second and subsequent times.
What do I need to check?
NA8 Start Up Procedure
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Fast Driver
- Posts: 498
- Joined: Fri Mar 02, 2012 5:13 pm
- Vehicle: NA8
- Location: Newcastle Area NSW
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: NA8 Start Up Procedure
This started the same way:
viewtopic.php?f=55&t=46425
Also, failing 'Fuel Inj' relay in engine bay fuse box can have a similar affect.
viewtopic.php?f=55&t=46425
Also, failing 'Fuel Inj' relay in engine bay fuse box can have a similar affect.
-
- Fast Driver
- Posts: 498
- Joined: Fri Mar 02, 2012 5:13 pm
- Vehicle: NA8
- Location: Newcastle Area NSW
Re: NA8 Start Up Procedure
Is the fuel pump supposed to pump when the key is switched on before engaging the starter motor?
-
- Fast Driver
- Posts: 423
- Joined: Thu May 19, 2011 11:10 am
- Vehicle: ND - 2
- Location: brisbane
Re: NA8 Start Up Procedure
Hi.
Yes as soon as you turn the ignition on the pump starts to pressurise the fuel rail.
Yes as soon as you turn the ignition on the pump starts to pressurise the fuel rail.
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: NA8 Start Up Procedure
As Ralt says, but it won't necessarily be audible - it isn't on my NA8, which hasn't been changed from factory in that area.
Btw, thought you were indicating above it was audible on second & subsequent ignition turns.
Btw, thought you were indicating above it was audible on second & subsequent ignition turns.
-
- Fast Driver
- Posts: 498
- Joined: Fri Mar 02, 2012 5:13 pm
- Vehicle: NA8
- Location: Newcastle Area NSW
Re: NA8 Start Up Procedure
Thanks 'ralt'. What do I need to look at to fix this?ralt wrote:Hi.
Yes as soon as you turn the ignition on the pump starts to pressurise the fuel rail.
-
- Fast Driver
- Posts: 498
- Joined: Fri Mar 02, 2012 5:13 pm
- Vehicle: NA8
- Location: Newcastle Area NSW
Re: NA8 Start Up Procedure
Here's a fresh explanation.93_Clubman wrote:As Ralt says, but it won't necessarily be audible - it isn't on my NA8, which hasn't been changed from factory in that area.
Btw, thought you were indicating above it was audible on second & subsequent ignition turns.
Switch ignition key on = no sound from pump = try to start = does not fire within 5 seconds = switch ignition on = can hear the pump = try to start = does not within 5 seconds.
I go through this procedure several times and then it fires up.
Are there any items I should check. I have removed the pump and replaced the filter and there appears to be no blockages at those points.
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: NA8 Start Up Procedure
93_Clubman wrote:This started the same way:
viewtopic.php?f=55&t=46425
Also, failing 'Fuel Inj' relay in engine bay fuse box can have a similar affect.
-
- Fast Driver
- Posts: 498
- Joined: Fri Mar 02, 2012 5:13 pm
- Vehicle: NA8
- Location: Newcastle Area NSW
Re: NA8 Start Up Procedure
Tried substitution of said relay with no effect.
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: NA8 Start Up Procedure
myredmx5 wrote:Tried substitution of said relay with no effect.
What about checking if the so called 'black wire' issue is present as per the above link, ie: viewtopic.php?f=55&t=46425
It's also possible there's an intermittent issue with the fuel pump relay under the dash on the driver side.
Might also be an issue with ECU - Conti in Darwin had an onging issue with his NA8 Clubman, which he finally identified as ECU components: viewtopic.php?f=73&t=41675&p=535710#p535710
Also worth checking all earth points.
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: NA8 Start Up Procedure
pump in tank is buggered or wiring in tank is buggered.
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 13 guests