Need new clutch for a NA8, 1.6 Clutch setup on a 1.8?

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

booki89
Fast Driver
Posts: 191
Joined: Sat Dec 28, 2013 3:56 pm
Vehicle: NA8
Location: Melbourne

Re: Need new clutch for a NA8, 1.6 Clutch setup on a 1.8?

Postby booki89 » Sun Mar 16, 2014 1:05 am

Thanks for the info :)

Can anybody recommend some online stores for parts?

I am big on my motorbikes, and if you buy online from the states parts are almost 90% cheaper in some cases!

Does anybody know some sites where buying quite a few things ends up a bit cheaper?

So far I have only found http://www.mx5parts.co.uk/

User avatar
CQYD
Fast Driver
Posts: 125
Joined: Tue Feb 03, 2009 6:02 pm
Vehicle: NA8

Re: Need new clutch for a NA8, 1.6 Clutch setup on a 1.8?

Postby CQYD » Mon Mar 17, 2014 10:45 am

http://www.good-win-racing.com
http://949racing.com/

I have purchased off these two retailers in the states, both positive experiences.

booki89
Fast Driver
Posts: 191
Joined: Sat Dec 28, 2013 3:56 pm
Vehicle: NA8
Location: Melbourne

Re: Need new clutch for a NA8, 1.6 Clutch setup on a 1.8?

Postby booki89 » Thu Mar 20, 2014 1:27 am

Think I may have almost settled on a clutch/flywheel setup for my 1.8

http://www.ebay.com/itm/161223977540?it ... 23&vxp=mtr


After doing some reading re flywheels, is a 11.7lbs flywheel too light? approx 5.3kgs.

215mm is the 1.8 clutch from what I have read.

Car is my daily, but will be raced.

Standard clutch should be ok ?


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 106 guests