Hey guys, can someone tell me what could causing this? I suspect that the door had been damaged by the previous owner before but of cause I don't want that is truth. So please help me out guys.
Sent from my iPhone using Tapatalk
Weather strip problem need help
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- tescoking
- Racing Driver
- Posts: 824
- Joined: Sat Dec 01, 2012 1:48 am
- Vehicle: NB8B
- Location: Perth, WA
- aka_juffa
- Racing Driver
- Posts: 1005
- Joined: Wed Dec 14, 2011 2:40 pm
- Vehicle: NA8
- Location: SE Melbourne.
Re: Weather strip problem need help
The weather strip is a replaceable part. Pull the inner door card off and see if you can re-seat the weather strip.
J
J
Motor Neurone Disease chose me, I choose Voluntary Assisted Dying.
- wassup
- Fast Driver
- Posts: 384
- Joined: Mon Sep 26, 2011 1:23 pm
- Vehicle: NA6
- Location: Sydney
Re: Weather strip problem need help
Problem is caused by a broken clip which is visible in your first pic. There are 4-5 of these that run the length of the strip. You can see the little square part in the middle, that is where you press in with something like a flathead and the clip releases allowing you to lift it up and out when replacing. The little tab in the middle is probably broken due to age.
I'm pretty sure you can buy these clips separate (for a few dollars) rather than paying $120 for a pair of strips
Edit
http://www.ilmotorsport.de/shop/article_detail.php5?aid=1280&oid=12&depth=0&page=4&count=65&PHPSESSID=5d2e12750364261aa473938f4e953f9c
I'm pretty sure you can buy these clips separate (for a few dollars) rather than paying $120 for a pair of strips
Edit
http://www.ilmotorsport.de/shop/article_detail.php5?aid=1280&oid=12&depth=0&page=4&count=65&PHPSESSID=5d2e12750364261aa473938f4e953f9c
1990 NA6
Civic Type R
Civic Type R
- tescoking
- Racing Driver
- Posts: 824
- Joined: Sat Dec 01, 2012 1:48 am
- Vehicle: NB8B
- Location: Perth, WA
Weather strip problem need help
I have bought the new clips to replace it as well, but it just doesn't work.
Only the yellow one is old, all the white one are new.
Sent from my iPhone using Tapatalk
Only the yellow one is old, all the white one are new.
Sent from my iPhone using Tapatalk
- tescoking
- Racing Driver
- Posts: 824
- Joined: Sat Dec 01, 2012 1:48 am
- Vehicle: NB8B
- Location: Perth, WA
Re: Weather strip problem need help
Hey guys, the clips and strip are new, but it is still popping up, please give me a hand on this.
- StuwieP
- Fast Driver
- Posts: 439
- Joined: Thu Jun 21, 2012 6:54 pm
- Vehicle: NA6
- Location: Melbourne
Re: Weather strip problem need help
tesco the rubber at the end of the strip folds down aorund the door and seats in the door jam/where the door closes.
Is the clip oriented correctly?
edit: the strips are fairly soft, are you sure it's not damaged?
Is the clip oriented correctly?
edit: the strips are fairly soft, are you sure it's not damaged?
My NA6/SE build
Engine #1 RIP 04/07/2020
Engine #1 RIP 04/07/2020
- tescoking
- Racing Driver
- Posts: 824
- Joined: Sat Dec 01, 2012 1:48 am
- Vehicle: NB8B
- Location: Perth, WA
Re: Weather strip problem need help
StuwieP wrote:tesco the rubber at the end of the strip folds down aorund the door and seats in the door jam/where the door closes.
Is the clip oriented correctly?
edit: the strips are fairly soft, are you sure it's not damaged?
The strip is not soft, it is very hard and I can't get it "stick" on the door
- tescoking
- Racing Driver
- Posts: 824
- Joined: Sat Dec 01, 2012 1:48 am
- Vehicle: NB8B
- Location: Perth, WA
Re: Weather strip problem need help
Problem solved, replace the yellow clip to white clip and using 7 clips instead of 5, weatherstrip now will not pop up although there are a small gap between it to the door.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 163 guests