I have only just bought the car. The gears tend to grate when changing. The clutch feels ok though you have to push it to the floor. A lazy slave cylinder?
This may have been raised before however what oil/additive should I use in the box, it is strictly a road car, no competition.
The previous owner just changed the oil as part of the 100k service but I don't know what he used. I live on the Gold Coast so there are no cold starts.
Ideas please
Steven
advice needed SE Gearbox
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Fast Driver
- Posts: 209
- Joined: Fri Aug 14, 2009 9:24 am
- Vehicle: NB SE
- Location: Burleigh
-
- Speed Racer
- Posts: 3511
- Joined: Thu May 19, 2011 3:38 pm
- Vehicle: NA8
- Location: Brisbane
Re: advice needed SE Gearbox
Identify the problem first. If the previous owner just changed the oil it's probably not oil. Check out the salve cyclinder and see if it needs replacement.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- aviper4u
- Fast Driver
- Posts: 258
- Joined: Sat Jan 23, 2010 12:36 pm
- Vehicle: NB8B
- Location: Sydney
- Contact:
Re: advice needed SE Gearbox
isnt this the usual MX5 gearbox issues especially the 6 speed?
I wouldnt be too worried unless its still clunky after everything is nice and hot, just take it easy when cold?
I wouldnt be too worried unless its still clunky after everything is nice and hot, just take it easy when cold?
Can you remember your first drive?
- davekmoore
- Speed Racer
- Posts: 4681
- Joined: Thu Apr 30, 2009 1:53 am
- Vehicle: NC
- Location: Esprick, UK
Re: advice needed SE Gearbox
aviper4u wrote:isnt this the usual MX5 gearbox issues especially the 6 speed?
No.
aviper4u wrote:I wouldnt be too worried unless its still clunky after everything is nice and hot, just take it easy when cold?
Should be ok cold too.
Maybe clutch dragging?
UK since return: Standard NC2 (horrid), C200K, ND2 BBR, NC2 BBR200 (loved it), NC BBR300 (better than BARMY), V-Special, turbo NB8B (my 84th car)
- speed freak
- Racing Driver
- Posts: 873
- Joined: Sun Mar 10, 2013 6:39 pm
- Vehicle: NB8B
- Location: Gold Coast
Re: advice needed SE Gearbox
The 6 speeds tend to be quit nothcy, mine makes a sort of click noise on some gear changes. Its an odd gearbox, sometimes Ill get a nice smooth change and others it will require a little more force/effort and other times it will click into gear. I wouldnt say mine has ever crunched when changing gear but you definitely feel them engage haha. Mine has a new clutch, flywheel, clutch slave and master, line and fluid.
Look at the colour of the clutch fluid, see if it looks old. Also look up under the dash at the clutch pedal and see if there is any fluid leaking, also look at the clutch slave on the side of the gearbox for the same reason.
Id say what your feeling is the usual notchy 6 speed issue. Its a great gearbox but the 5 speeds definitely do have a better feel to them.
Look at the colour of the clutch fluid, see if it looks old. Also look up under the dash at the clutch pedal and see if there is any fluid leaking, also look at the clutch slave on the side of the gearbox for the same reason.
Id say what your feeling is the usual notchy 6 speed issue. Its a great gearbox but the 5 speeds definitely do have a better feel to them.
-
- Fast Driver
- Posts: 209
- Joined: Fri Aug 14, 2009 9:24 am
- Vehicle: NB SE
- Location: Burleigh
Re: advice needed SE Gearbox
Yes I much prefer the five speed
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: advice needed SE Gearbox
Miataroadster SSK makes the SE 6 speed much nicer.
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
- mx52nv
- Purple Porsche Eater
- Posts: 1345
- Joined: Tue Sep 20, 2005 5:13 am
- Vehicle: Non MX-5
- Location: Perth
Re: advice needed SE Gearbox
Or any 6 speed for that matter!
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 31 guests