Exhaust for NA
Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: Exhaust for NA
there are lots on this subject. Try a search for Town and Country and that will pull up plenty of info. Best approach get it done professionally- its not that expensive. I have heard the experts often say the NA header/ exhausts are very good.
-
- Speed Racer
- Posts: 11983
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Exhaust for NA
Mr Morlock wrote:I have heard the experts often say the NA header/ exhausts are very good.
Selective hearing.
To OP, if you haven't already read info to the contrary, then here's just a couple of many threads:
viewtopic.php?f=29&t=53120&p=669071
viewtopic.php?f=18&t=57088
If you can't replace the whole system in one go, then do hi flow cat & cat back initially followed later by headers.
- MrRevhead
- Racing Driver
- Posts: 715
- Joined: Mon Mar 26, 2012 2:40 pm
- Vehicle: NA6
- Location: NW Sydney
Re: Exhaust for NA
Hi Chris,
I'am pretty sure I saw you yesterday on Quakers Hill Parkway turning out from Nirimba. Car is looking good with the new suspension and roll bar.
re: exhaust, save yourself the time and money and PM Nitrodann. He will knock something up for you that will be effective based on his experience at a competitive price.
Sent from my GT-I9300 using Tapatalk 2
I'am pretty sure I saw you yesterday on Quakers Hill Parkway turning out from Nirimba. Car is looking good with the new suspension and roll bar.
re: exhaust, save yourself the time and money and PM Nitrodann. He will knock something up for you that will be effective based on his experience at a competitive price.
Sent from my GT-I9300 using Tapatalk 2
1991 NA6 BRG Limited Edition #124 (Aus Delivered)


- MrRevhead
- Racing Driver
- Posts: 715
- Joined: Mon Mar 26, 2012 2:40 pm
- Vehicle: NA6
- Location: NW Sydney
Re: Exhaust for NA
Even though I didn't see the drivers face, I thought that was your car haha
I was thinking why were you still rocking the stock daisies even though you have new rims lol
I hope you do realise with a full exhaust (headers & exhaust), you can only expect negligible gains (6-10HP) for the price outlay.
If you ever plan going forced induction, put the funds in an interest account for the future fund for brakes/diff or the other hardware
Best of luck!
I was thinking why were you still rocking the stock daisies even though you have new rims lol
I hope you do realise with a full exhaust (headers & exhaust), you can only expect negligible gains (6-10HP) for the price outlay.
If you ever plan going forced induction, put the funds in an interest account for the future fund for brakes/diff or the other hardware
Best of luck!

1991 NA6 BRG Limited Edition #124 (Aus Delivered)


- MrRevhead
- Racing Driver
- Posts: 715
- Joined: Mon Mar 26, 2012 2:40 pm
- Vehicle: NA6
- Location: NW Sydney
Re: Exhaust for NA
An exhaust for a NA engine would obtain more than the required back pressure compared to an exhaust for forced induction, therefore you will be back at square one investing in a new exhaust in future, that is more free flowing/suitable for FI.
Food for thought...save your pennies if FI is your ultimate goal in modifying your car and do it all properly at once. Just my opinion.
Food for thought...save your pennies if FI is your ultimate goal in modifying your car and do it all properly at once. Just my opinion.
1991 NA6 BRG Limited Edition #124 (Aus Delivered)


-
- Driver
- Posts: 57
- Joined: Mon Mar 18, 2013 2:47 pm
- Vehicle: NA6
- Location: Townsville
- Contact:
Re: Exhaust for NA
+Also recommend contacting Nirtodann was great getting him to make it up alot cheaper the a cheap exhaust shop better service too haha
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 5 guests