time to ditch the AWFUL bendix advance pads and put on some new rotors...
i hear lots of talk about the TRW pads but is there a particular model of pad?
its for a 1990 NA6 turbo (standard small rotors)that will see a few track days a year.
i dont care about dusting or rotor wear
which TRW pads?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Fast Driver
- Posts: 307
- Joined: Tue Jul 05, 2005 5:13 pm
- Vehicle: NA6 - Turbo
- Location: New Zealand
- Contact:
which TRW pads?
red'90 vf10 turbo. FMIC,dual feed fuel rail, E Manage, "330cc" injectors.16" ADVAN RG wheels, http://www.cardomain.com/ride/264041/6
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: which TRW pads?
id go some Hawk HP+ pads
TRW pads are pretty cheap and nasty
TRW pads are pretty cheap and nasty
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: which TRW pads?
TRW pads are far from nasty. Nearly the same a QFM pads, but more dusty.
-
- Fast Driver
- Posts: 207
- Joined: Sat May 26, 2012 6:10 pm
- Vehicle: NB8A
- Location: Kirrawee, Sydney
Re: which TRW pads?
I've used TRW pads on my tuned NA6 and found them more than capable. Certainly no problem with fade for 10 - 12 laps of WP. The best part is they only cost around $70 and are treated to work up around 600 degrees celcius.
Check out this site, this is where I bought my pads from. I was more than happy with them and I expect you will also. No special order necesary, just buy the pads that are for your model.
http://www.eziautoparts.com.au/clutch-a ... -pads.html
Cheers - John
Check out this site, this is where I bought my pads from. I was more than happy with them and I expect you will also. No special order necesary, just buy the pads that are for your model.
http://www.eziautoparts.com.au/clutch-a ... -pads.html
Cheers - John
UNDERSTEER is when you hit the wall with the front of the car. OVERSTEER is when you hit the wall with the rear of the car.
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: which TRW pads?
650 degrees. they also have a high friction coefficient (0.47-0.52) so the stop when you put your foot down.
i have a trw twice in my car with rda slotted rotors. slots are gone by 100,000km, pads still have 50% meat left.
i have a trw twice in my car with rda slotted rotors. slots are gone by 100,000km, pads still have 50% meat left.
-
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: which TRW pads?
Thanks for that link. Guys like fattima and wozzah1975 who have come into the MX5 motorsport community after years of competing in Escorts have always talked about these as best bang for the buck performance pads. I didn't realise they were that cheap though.ja9 wrote:http://www.eziautoparts.com.au/clutch-and-brake/disc-pads/trw-disc-pads.html
Cheers - John
Have a look from halfway down this page. viewtopic.php?f=30&t=51267&p=645287&hilit=lucas#p645287
’95 NA8
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: which TRW pads?
lol those are my wheels. did say they were dusty.manga_blue wrote:Thanks for that link. Guys like fattima and wozzah1975 who have come into the MX5 motorsport community after years of competing in Escorts have always talked about these as best bang for the buck performance pads. I didn't realise they were that cheap though.ja9 wrote:http://www.eziautoparts.com.au/clutch-and-brake/disc-pads/trw-disc-pads.html
Cheers - John
Have a look from halfway down this page. viewtopic.php?f=30&t=51267&p=645287&hilit=lucas#p645287
though they have released a low dost version since then.
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 338 guests