Hi All,
Hoping to get some advice from the forum.
My mechanic has advised me that front wheel bearings need replacing.
Are these seperate bearings on in a Hub kit?.
Any recommendations on where to buy these from in or around Brisbane would be a great help.
Cheers - Agro
2007 NC Front Wheel Bearings
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: 2007 NC Front Wheel Bearings
they are a hub kit
if you can source some RX8 hubs, they bolt straight up and are much stronger
if you can source some RX8 hubs, they bolt straight up and are much stronger
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
Charlie Brown
- Speed Racer
- Posts: 2623
- Joined: Mon Apr 28, 2003 11:00 am
- Vehicle: NC
- Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
- Contact:
Re: 2007 NC Front Wheel Bearings
As Regie said, get the RX-8 hub but it must be the later model RX-8 after 2009 for the ABS sensor connection to match.
The hub is a full sealed unit so you can't change the bearings and from personal experience, DON'T get an after market hub. I had ABS and fitment problems with the two I tried.
Read all about it in this post: viewtopic.php?f=79&t=60644
The hub is a full sealed unit so you can't change the bearings and from personal experience, DON'T get an after market hub. I had ABS and fitment problems with the two I tried.
Read all about it in this post: viewtopic.php?f=79&t=60644
Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 238 guests
