Poor handling after a service

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

fcruz3r
Fast Driver
Posts: 222
Joined: Sun Feb 10, 2013 10:28 pm
Vehicle: NB8B
Location: Perth WA

Re: Poor handling after a service

Postby fcruz3r » Tue Dec 17, 2013 6:13 pm

uneven tyre wear is more prominent to how it affects handling if fitted to the front. My guess is that you had bad camber wear and/or flatspotting on the rear tyres. When they moved it to the front, it will veer left or right depending on how bad the camber wear ..and that skipping is probably a flat spot that's felt when weight shifts to the front during braking.

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re: Poor handling after a service

Postby JBT » Tue Dec 17, 2013 9:18 pm

cemilbrowne wrote:2) I've checked the pressures.

...and they are set at :?:
Image

cemilbrowne
Learner Driver
Posts: 16
Joined: Thu Oct 11, 2012 2:59 pm
Vehicle: NC

Re: Poor handling after a service

Postby cemilbrowne » Wed Dec 18, 2013 7:36 pm

Hi all,

Sorry - not ignoring, just out of town until the weekend. Will revert back.

-Cemil

markwid
Fast Driver
Posts: 151
Joined: Sat Jul 13, 2013 10:23 pm
Vehicle: NB8B
Location: Sydney

Re: Poor handling after a service

Postby markwid » Thu Dec 19, 2013 11:48 am

If all else is in order, tire pressure maybe a factor here. It definitely changes the way MX-5 behaves significantly.

cemilbrowne
Learner Driver
Posts: 16
Joined: Thu Oct 11, 2012 2:59 pm
Vehicle: NC

Re: Poor handling after a service

Postby cemilbrowne » Sun Jan 05, 2014 7:37 pm

Hi all,

A belated update here, since I've been on holidays:

I took the car to a tyre shop that I trust (a close mate of mine). His guys looked at it and immediately figured out what was wrong:

1) The tyres were rotated front to back - and the tyres had a bit more wear, that didn't help.
2) The tyre pressure was completely out of control. I'd clearly not checked this well, because it was around 50-55 PSI! Double where they should be!

I was driving on tiny strips of rubber, essentially, which is why the car didn't grip the road in any way. It also made the ride much worse.

Once sorted, the car handles like a dream again.

For future reference, listen to everyone when they say to check the tyre pressure, and check it again. Unfortunately, spinning wheels didn't do a great job of that this time (and neither did I in double-checking).

Thanks,
Cemil

Cort500
Fast Driver
Posts: 133
Joined: Wed Dec 25, 2013 11:48 pm
Vehicle: NB8A
Location: Ipswich

Re: Poor handling after a service

Postby Cort500 » Mon Jan 06, 2014 7:42 am

:oops:
It's the wife's car.

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Poor handling after a service

Postby project.r.racing » Mon Jan 06, 2014 8:25 am

wow i was the first one to suggest pressure back on the 15th. and only sorted out recently. a 2 minute job to check. wow again. :lol:

User avatar
bigdog
King of the kennel
Posts: 2233
Joined: Wed May 25, 2005 3:07 pm
Vehicle: NB SP
Location: Blue Mountains
Contact:

Re: Poor handling after a service

Postby bigdog » Mon Jan 06, 2014 10:02 am

Sorry, but you've mentioned that Spinning Wheels didn't do a great job - but clearly you haven't checked your tyre pressures, and once set correctly the car is handling "like a dream again". How could this mean that the guys at Spinning Wheels have done something wrong? They do wheel alignments, and as your car is handling so well now it would seem they did that well. I have never used them, don't know them, but I am not sure they would appreciate being blamed for somebody else's mistake.
Image
Marvin - '02 Silver SP - BD, PSS9, Guru, Build #62 Cardomain

project.r.racing
Speed Racer
Posts: 3722
Joined: Sun Jan 18, 2009 10:16 pm
Vehicle: Non MX-5
Location: Glasshouse Mountains, QLD

Re: Poor handling after a service

Postby project.r.racing » Mon Jan 06, 2014 12:10 pm

those guys dont balance wheels also? i'm pretty sure that any place that does alignments, also does balancing. if unsure of proceedure to balance wheels. then i would understand why your are following your line of questioning.

in the end it doesn't matter. the OP said he has checked pressure multiple times since starting the thread. clearly not. he wasn't help himself out. it's a 2 minute job maximum. i khow he has been busy, but finding 2 minutes inside a 3 week period shouldn't cause anyone too many issues.


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 271 guests