Since mine had a few large (big enough to stick my hand into...) holes in it I got a lovely mohair soft top for Christmas from my old man, after being teased a little about 'how much better the NC folding hard top is'.
Gonna take a few photos of the old (15 years old!) soft top and install the new one tomorrow, with a bit of help from my old man, and the previous owner of the car.
Any tips or warnings? It came with all these felt pads, and I need to buy some contact adhesive apparently.
I'm quite excited! The old one is very grey and sad looking, even if you ignore the holes!
!
Soft top install!
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
- Fast Driver
- Posts: 481
- Joined: Tue Mar 12, 2013 1:47 pm
- Vehicle: NB8A
- Location: Melbourne
Soft top install!
"Don't go crashing into Vulvas. *Volvos"
-
- Racing Driver
- Posts: 771
- Joined: Sun Oct 28, 2012 3:43 am
- Vehicle: ND - Turbo
- Location: WA
- dave2221
- Fast Driver
- Posts: 493
- Joined: Thu Sep 17, 2009 10:01 pm
- Vehicle: NB SE
- Location: Sydney
Re: Soft top install!
took me like 10 hours to do mine.... with the help of my uncle. on my NB
Still needs some tweaking, as i think the top is a little bit tight.
but the instructions are a little crappy....
Still needs some tweaking, as i think the top is a little bit tight.
but the instructions are a little crappy....
-
- Fast Driver
- Posts: 249
- Joined: Mon Oct 04, 2010 1:28 am
- Vehicle: NB8B - Turbo
- Location: Brisbane QLD
Re: Soft top install!
Yeah I did mine and took around 10 hours with help from a mate. But it did take a few days in the sun to stretch it enough so that the top could close. Definitely takes some patience!
-
- Learner Driver
- Posts: 20
- Joined: Mon Oct 28, 2013 9:26 am
- Vehicle: NB8A
Re: Soft top install!
Did my nb recently, still pretty tight to close...
I would leave the nuts for the rain rail a bit loose and not fit the middle section ( the interior lining section properly if u can just attach it so that it doesn't flop around at least) for a week or so to give it time to stretch.
Seats out makes this soo much easier too!
And as above, plenty of beer!
I would leave the nuts for the rain rail a bit loose and not fit the middle section ( the interior lining section properly if u can just attach it so that it doesn't flop around at least) for a week or so to give it time to stretch.
Seats out makes this soo much easier too!
And as above, plenty of beer!
-
- Fast Driver
- Posts: 249
- Joined: Mon Oct 04, 2010 1:28 am
- Vehicle: NB8B - Turbo
- Location: Brisbane QLD
Re: Soft top install!
2nd this, definitely take the seats out, its only 4 bolts each. Also jaycar sell removal tools which make getting the plugs for the carpet much easier to get out.
- Boyracer
- MX-5 Encyclopedia
- Posts: 2568
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NC
- Location: Silverdale.NSW
- Contact:
Re: Soft top install!
You don't need to rivet the rain rail back on, just fit it to the car and then feed in the soft top, don't leave anything loose, the top will be very tight to close the first time, just close it and leave it closed for a few weeks.
NC Roadie, NC Racey, ND Racey….and a 30AE
Plus several others in the bone yard...
Plus several others in the bone yard...
-
- Fast Driver
- Posts: 481
- Joined: Tue Mar 12, 2013 1:47 pm
- Vehicle: NB8A
- Location: Melbourne
Re: Soft top install!
Done. Had to use 40kg of weight on the front bar of the roof and 2 guys to get it closed.
Gonna let it bake in the sun closed for a week or 2 before I open it.
Seats out and roof frame out is the easiest way.
Gonna let it bake in the sun closed for a week or 2 before I open it.
Seats out and roof frame out is the easiest way.
"Don't go crashing into Vulvas. *Volvos"
- MrRevhead
- Racing Driver
- Posts: 715
- Joined: Mon Mar 26, 2012 2:40 pm
- Vehicle: NA6
- Location: NW Sydney
Re: Soft top install!
How long did it take you?22Silver wrote:Done. Had to use 40kg of weight on the front bar of the roof and 2 guys to get it closed.
Gonna let it bake in the sun closed for a week or 2 before I open it.
Seats out and roof frame out is the easiest way.
1991 NA6 BRG Limited Edition #124 (Aus Delivered)
-
- Fast Driver
- Posts: 481
- Joined: Tue Mar 12, 2013 1:47 pm
- Vehicle: NB8A
- Location: Melbourne
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 170 guests