5x Hazard Light Flashes.... Error code?

MX5 Car Clubs of Australia

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

Rasputin
Fast Driver
Posts: 184
Joined: Wed Jun 05, 2013 9:44 am
Vehicle: NB8A - Turbo
Location: SYDNEY

5x Hazard Light Flashes.... Error code?

Postby Rasputin » Fri Dec 20, 2013 10:39 am

As title states.

Also have a red car with a key inside it flashing above my temp gauge.

Two long strobes then 4 short ones.

Car no longer running factory Ecu.


Thanks guys!

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: 5x Hazard Light Flashes.... Error code?

Postby hks_kansei » Fri Dec 20, 2013 10:47 am

Did it start just after the ECU change?

I would hazard a guess that the new ECU doesn't use the immobiliser chip in the key, and the light is whatever remains of the immobiliser system saying that it thinks it's been hotwired or something (perhaps it's expecting a signal from the ECU?)

No idea how the system works, but normally a car with a key logo is a symbol for immobiliser/alarm/central locking
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

User avatar
greenMachine
Forum Guru
Posts: 4142
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Sports car paradise - Canberra
Contact:

Re: 5x Hazard Light Flashes.... Error code?

Postby greenMachine » Fri Dec 20, 2013 6:16 pm

NB8A? Try the alternator - mine did that before I found some dodgy diodes in the control module. I was running a Haltech E8 at the time, IIRC.

:mrgreen:
I never met a horsepower I didn't like (thanks bwob)

Build thread

NB SE - gone to the dark side (and loving it 8) )

Rasputin
Fast Driver
Posts: 184
Joined: Wed Jun 05, 2013 9:44 am
Vehicle: NB8A - Turbo
Location: SYDNEY

Re: 5x Hazard Light Flashes.... Error code?

Postby Rasputin » Fri Dec 20, 2013 7:09 pm

Well the 5x Hazard light flicker happened occasionally even with the stock ECU in. Sometimes it happens twice in a perfect series, making it ten flickers. It flickers at about twice the pace than if you were to press the hazard light button.

The Car with the key light only happened after I changed the ECU out to Adaptronic.

Yeah, it's an NB8A.



Greenmachine, what do you mean - Check my Alternator?

Thanks!

Dan.

User avatar
greenMachine
Forum Guru
Posts: 4142
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NB SE
Location: Sports car paradise - Canberra
Contact:

Re: 5x Hazard Light Flashes.... Error code?

Postby greenMachine » Fri Dec 20, 2013 7:59 pm

Rasputin wrote:Greenmachine, what do you mean - Check my Alternator?

The NB8A alternator has a control module inside it - the voltage regulator. This has diodes, which failed in my case. Replacing the alternator, or just the module if the rest is still good, is the fix for this problem.

See if you can borrow an alternator - make sure it is the right one - and see if the problem goes away. Obviously, it needs to be an alternator you know is working properly.

:mrgreen:

EDIT: AFAIK, this has nothing to do with running an aftermarket ECU, at least mine was unrelated. I replaced the alternator, and all was good.
I never met a horsepower I didn't like (thanks bwob)

Build thread

NB SE - gone to the dark side (and loving it 8) )


Return to “MX5 General Chat”

Who is online

Users browsing this forum: No registered users and 1 guest