Rattle below wind deflector (NC)

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

cemilbrowne
Learner Driver
Posts: 16
Joined: Thu Oct 11, 2012 2:59 pm
Vehicle: NC

Rattle below wind deflector (NC)

Postby cemilbrowne » Sun Dec 15, 2013 2:51 pm

Hi all,

It seems to be my day for asking questions - I've got a really annoying rattle in my 2006 NC. It's in the trim panel between the seats, right below the wind deflector and above the small compartment.

Best photo I could find is below (not my car). It's the panel that has the headrest speaker grilles.

Anyone seen this before? I'm 90% sure it's coming from there - pushing on the panel stops the rattle. Any advice or guides that anyone has seen on removing it? I'm thinking of just taking it apart and seeing if I can foam everything?

Thanks,
Cemil

Image

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re: Rattle below wind deflector (NC)

Postby JBT » Sun Dec 15, 2013 6:08 pm

Search on the forum here for NC rattles. It is probably the centre compartment latch or a trim clip. You'll have to pull out the rear trim panel to access it - starting with removing the sill trim. :wink: There is also some good info on miata.net.
Image

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Re: Rattle below wind deflector (NC)

Postby Regie » Mon Dec 16, 2013 11:45 am

MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

cemilbrowne
Learner Driver
Posts: 16
Joined: Thu Oct 11, 2012 2:59 pm
Vehicle: NC

Re: Rattle below wind deflector (NC)

Postby cemilbrowne » Mon Dec 16, 2013 11:57 am

Regie wrote:http://www.miata.net/garage/tsb/09-040-08-2032.pdf


Hi Regie,

This was *incredibly* useful.

Thanks so much!

-Cemil

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Re: Rattle below wind deflector (NC)

Postby Regie » Mon Dec 16, 2013 6:14 pm

no problemo mate
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 155 guests