can anyone help me out in adelaide??

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

miatacharlie

can anyone help me out in adelaide??

Postby miatacharlie » Thu Nov 07, 2013 10:29 am

hey guys ,

you may have seen my previous thread about my 91 na6 not starting , im wondering if anyone in adelaide could help me out , my car gets fuel spark and air but still wont start and the only thing i czn really think of that i havent looked into is the ecu. so wht im asking is could someone loan me their ecu just to try and start my baby to see if she will fire up before i got blurting a bunch of money on a replacement as i cant really afford it if its not the issue and whilst i used to be in the local car scene a few years back i dont do that kinda stuff anymore and actually dont know anyone at all with a mx5 that could help me out!!

so if you can help i will compensate you in any means you feel necessary!


thanks in advance charlie!

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: can anyone help me out in adelaide??

Postby 93_Clubman » Fri Nov 15, 2013 12:20 pm

How did you go borrowing an NA6 ECU? In case you haven't been able to borrow one & are not aware, you can buy a second hand NA6 ECU for under $50 on this forum. I know it would be better to borrow one, but if not possible then there are cheap ones out there. And they are occasionally a problem in NA6s & NA8s, so def worth considering as a cause. Sometimes a visual inspection of the ECU printed circuit board will reveal a problem as the board or earth post can show signs of blackening or discolouration, often a brown colour, from leaking capacitors.

thehillsarecalling
Fast Driver
Posts: 361
Joined: Mon Feb 04, 2013 9:01 pm
Vehicle: NA6
Location: SA :)

Re: can anyone help me out in adelaide??

Postby thehillsarecalling » Mon Nov 18, 2013 6:01 pm

Hey mate. If you're still stick, send me a pm. I'm in adel and have a stock na6 ECU you can try, as well as a aftermarket ECU connected to a stock loom that we can use for diagnostic purposes.

I'm free after 6pm weeknights. If you're up north I might be tempted to drive around and have a looksy
Daily: '91 Malibu - NB8B conversion, 6sp, Teins, Whitelines
Terribly Missed: '02 Black SP (#55)
Plus about 12 others over the years..


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 68 guests