NB Cylinder Head

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Post Reply
DarrylA
Driver
Posts: 97
Joined: Mon Jan 28, 2013 5:22 pm
Vehicle: NB8A
Location: Leopold - 10 minutes out of Geelong VIC

NB Cylinder Head

Postby DarrylA » Mon Oct 07, 2013 5:32 pm

Hi Guys
Can anyone tell me how to find out what cylinder head is on my 1998 1.8 NB.
I believe there are lots of variations. I was hoping I can find out by engine number.
I want to buy a spare head with cams, so we can do a bit of playing around.
Thanks guys !!!!!!
Top
User avatar
A.Chen89
Racing Driver
Posts: 509
Joined: Thu Jun 10, 2010 6:09 pm
Vehicle: NB8B - Turbo
Location: Western Sydney

Re: NB Cylinder Head

Postby A.Chen89 » Mon Oct 07, 2013 5:33 pm

BP4W head, non VVT
Top
DarrylA
Driver
Posts: 97
Joined: Mon Jan 28, 2013 5:22 pm
Vehicle: NB8A
Location: Leopold - 10 minutes out of Geelong VIC

Re: NB Cylinder Head

Postby DarrylA » Mon Oct 07, 2013 5:47 pm

Many thanks Fast Driver. Time to start looking and see if we can make some horsepower!!!
Top
Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: NB Cylinder Head

Postby Magpie » Mon Oct 07, 2013 6:43 pm

Forced induction or natural aspirated horsepower? MX5 Plus are doing a FI version of my head you pick the cams, valve springs etc however you will need to use a block with 85mm pistons. Compression i believe will be 9:1 where as mine is 11:1 as it is non FI.
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 5 guests