MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Queensland Motorsport

Moderators: timk, Andrew, miata, AJ, JBT

User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby Lokiel » Wed Sep 11, 2013 3:48 pm

Trackphotos wrote::
I thought the same thing, and had the same problem through the dipper with my helmet mount. Roll bar went in yesterday, bought a gopro roll bar mount today, should be perfect. Not sure what camera Stuart is using though, might not be feasible.


Stuart has a GoPro camera as far as I know. I suspect he was trying a different location for this event than he normally uses since his other videos are quite good.

I much prefer fixed mounts, helmet mount videos make me seasick :P
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716

User avatar
MINX
Racing Driver
Posts: 1658
Joined: Mon Apr 07, 2008 7:51 pm
Vehicle: NB SE
Location: Brisbane

MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby MINX » Wed Sep 11, 2013 7:35 pm

Lokiel wrote:
Trackphotos wrote::
I thought the same thing, and had the same problem through the dipper with my helmet mount. Roll bar went in yesterday, bought a gopro roll bar mount today, should be perfect. Not sure what camera Stuart is using though, might not be feasible.


I am so sorry guys
I will try to make it look better next time
Do you want me to buy a few more gopros?
Have one on bonnet one on boot one on pedals and an overhead helicopter view?
Will that be ok Simon?
Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby Magpie » Wed Sep 11, 2013 8:01 pm

Try http://www.vboxaustralia.com.au/Video%20VBox%20Pro.html up to 4 cameras, GPS (10 or 20 Hz) no post processing of overlays and very comprehensive software plus simple to set up. Can also hook up a display for lap times, predictive lap-timing, speed etc. and can data log upto 32 CAN channels.

User avatar
zero00
Speed Racer
Posts: 3248
Joined: Mon Apr 12, 2010 6:54 pm
Vehicle: NB8A
Location: Sunshine Coast Queensland

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby zero00 » Wed Sep 11, 2013 8:14 pm

I thought it was excellent Stu, hell you're NOT Cecil B De Mille!! :wink:
Roger D-SUNSHINE COAST
2000 NB8A-LP 69.1248|QR Clubman 71.9235|QR Sprint 68.1412
1989 NA6 B-SPEC #77|Toyota GTS86 MT

Trackphotos
Racing Driver
Posts: 1212
Joined: Tue Nov 06, 2012 10:03 pm
Vehicle: NB Roadster
Contact:

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby Trackphotos » Wed Sep 11, 2013 8:20 pm

MINX wrote:I am so sorry guys
I will try to make it look better next time
Do you want me to buy a few more gopros?
Have one on bonnet one on boot one on pedals and an overhead helicopter view?
Will that be ok Simon?


Not sure if joke, or PMS.
QR Clubman: 1:03.9 | QR Sprint: 1:01.4 | QR National: 1:29.4 | LS: 1:01.5 | Mt Cotton: 51.6

User avatar
timk
Racing Driver
Posts: 1928
Joined: Fri Dec 31, 2004 3:16 pm
Vehicle: NC

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby timk » Wed Sep 11, 2013 8:32 pm

Magpie it is a shame it is still 4:3 video! The analysis is pretty good though. I have played with the system first hand for a GT3.

Magpie
Speed Racer
Posts: 7468
Joined: Fri Feb 11, 2011 12:49 pm
Vehicle: NA6
Location: Purga, QLD

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby Magpie » Wed Sep 11, 2013 8:42 pm

I agree on the 4:3 but the software and other stuff make up for it. I have the lite version however there is a HD version available now but there is no compelling reason to upgrade.

I'm debating at the moment if I'm going to hook it up to the CAN or stick with the micro I put module which allows RPM and 4 x 5 volt inputs. All my current sensors that go into the innovate are 5v so I can just piggy back off these signals. The CAN will not pass through the ride height and other sensors so if I want to overlay ride heights I will need to piggyback the signal and make the wiring in the car more complicated. However this is getting off topic...

User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby Lokiel » Wed Sep 11, 2013 10:18 pm

Trackphotos wrote:
MINX wrote:I am so sorry guys
I will try to make it look better next time
Do you want me to buy a few more gopros?
Have one on bonnet one on boot one on pedals and an overhead helicopter view?
Will that be ok Simon?


Not sure if joke, or PMS.


I'm assuming he's joking - but in case you're not Stuart, I meant that I preferred your previous camera position which I'm assuming was mounted higher and pointing slightly down since it showed more of the track and it never disappeared from view.

But if you decide to add more cameras, I won't complain :P
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716

015CAR
Driver
Posts: 68
Joined: Fri Apr 29, 2011 11:55 am
Vehicle: NB8A - Turbo
Location: Bayside Brisvegas

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby 015CAR » Wed Sep 11, 2013 11:47 pm

Bugger all the talk about camera angles, I'm still chuckling over the comment about his ass sucking in a Sparco! BWWWWWAHHHAHAAAA.
Classic! :beer: That's sure as hell what I'd feel like!
Did have a play with a Gopro the other day, found the lack of discrete buttons etc difficult. was thinking of checking out a contour.The iPhone and ixus canon have been doing me so far with decent mounts, but I'd like to mount something externally...
...Working at the "big yellow bag" now so if there is something (electronics) you want rather than need, I am probably your man... PM me...
QR clubman 64.93 - lakeside 67 neat- first time out...

User avatar
Sparra
Driver
Posts: 56
Joined: Wed Apr 24, 2013 10:33 am
Vehicle: NA6
Location: Nanango, QLD

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby Sparra » Thu Sep 12, 2013 9:17 am

015CAR, try the phone app for accessing the gopro menus, or the LCD attachment, which gives you a touch menu system.

Trackphotos
Racing Driver
Posts: 1212
Joined: Tue Nov 06, 2012 10:03 pm
Vehicle: NB Roadster
Contact:

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby Trackphotos » Thu Sep 12, 2013 12:25 pm

Sparra wrote:015CAR, try the phone app for accessing the gopro menus, or the LCD attachment, which gives you a touch menu system.


Just don't forget to turn Wifi off after you have it set right. Leaving it on drops your battery life from 4hrs recording to 45min.
QR Clubman: 1:03.9 | QR Sprint: 1:01.4 | QR National: 1:29.4 | LS: 1:01.5 | Mt Cotton: 51.6

015CAR
Driver
Posts: 68
Joined: Fri Apr 29, 2011 11:55 am
Vehicle: NB8A - Turbo
Location: Bayside Brisvegas

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby 015CAR » Fri Sep 13, 2013 8:06 am

The app's 7 sec delay is too frustrating to me. I didn't try the LCD though...
It's certainly not a perfect product, there is still room in the market for better in motorsport- it's suitability for things like helmet cam lead to inefficiencies in design for other applications...
QR clubman 64.93 - lakeside 67 neat- first time out...

Trackphotos
Racing Driver
Posts: 1212
Joined: Tue Nov 06, 2012 10:03 pm
Vehicle: NB Roadster
Contact:

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby Trackphotos » Fri Sep 13, 2013 8:15 am

015CAR wrote:The app's 7 sec delay is too frustrating to me. I didn't try the LCD though...
It's certainly not a perfect product, there is still room in the market for better in motorsport- it's suitability for things like helmet cam lead to inefficiencies in design for other applications...


Oh yeah I forgot, for some reason the iOS app and the Android app have a huge difference in delay time. Android is around 2-3sec, iOS is upwards of 6. No idea why.

Definitely not perfect but then, nothing is. There may be room for someone to improve, but you can guarantee it won't be under $500 if they do.
QR Clubman: 1:03.9 | QR Sprint: 1:01.4 | QR National: 1:29.4 | LS: 1:01.5 | Mt Cotton: 51.6

User avatar
MINX
Racing Driver
Posts: 1658
Joined: Mon Apr 07, 2008 7:51 pm
Vehicle: NB SE
Location: Brisbane

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby MINX » Fri Sep 13, 2013 11:42 am

One lap from first session of Clubman.
Not particularly fast but i guess it shows the lines i was taking.
I think it was a 66s lap

Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08

User avatar
zero00
Speed Racer
Posts: 3248
Joined: Mon Apr 12, 2010 6:54 pm
Vehicle: NB8A
Location: Sunshine Coast Queensland

Re: MX-5 CLUB OF QLD TRACK DAY - 9 SEPTEMBER 2013

Postby zero00 » Fri Sep 13, 2013 6:17 pm

Anyone have a bracket for a 'Box Brownie'??
Roger D-SUNSHINE COAST
2000 NB8A-LP 69.1248|QR Clubman 71.9235|QR Sprint 68.1412
1989 NA6 B-SPEC #77|Toyota GTS86 MT


Return to “Queensland”

Who is online

Users browsing this forum: No registered users and 166 guests