AM I USING THE RIGHT OIL?
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Fast Driver
- Posts: 123
- Joined: Mon Apr 25, 2011 5:48 pm
- Vehicle: NA8
- Location: Melbourne
AM I USING THE RIGHT OIL?
My NA8 has done 253,000k & I drive it about 7,000 k a year including 3 or 4 track days. I am using Mobil 1 5W-30 & changing the oil every 6 months.
I switched to Mobil 1 from a heavier mineral oil which got rid of the valve clatter on start up. My feeling is that the 5W-30 may be too light.
Should I use a heavier oil? What brand of oil & weight would be best?
I switched to Mobil 1 from a heavier mineral oil which got rid of the valve clatter on start up. My feeling is that the 5W-30 may be too light.
Should I use a heavier oil? What brand of oil & weight would be best?
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Re: AM I USING THE RIGHT OIL?
I would ring a few of the Oil companies and ask them for a recommendation rather than asking another amateur- all the bigger ones have a free service. The other option is asking a specialist oil supplier who handles a variety of oils.
-
- Speed Racer
- Posts: 3511
- Joined: Thu May 19, 2011 3:38 pm
- Vehicle: NA8
- Location: Brisbane
Re: AM I USING THE RIGHT OIL?
Or search "best pull for nbc" or something similar by Silvia and read through the thread.
Sent from my GT-I9100 using Tapatalk 2
Sent from my GT-I9100 using Tapatalk 2
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: AM I USING THE RIGHT OIL?
Another way is to do some oil analysis and this will tell you a heap of information about what is going on especially if you do it over a long period. Have a look here (they are not the only ones) http://www.oilcheck.com.au/pricing/oil-analysis-price-list.html
This is what I will be doing with my engine once it is complete. It only adds about $40 to the cost but can tell you so much about your engine. There is a reason why mining/transport companies use oil analysis.
This is what I will be doing with my engine once it is complete. It only adds about $40 to the cost but can tell you so much about your engine. There is a reason why mining/transport companies use oil analysis.
- Buckshot
- Fast Driver
- Posts: 107
- Joined: Sun Nov 20, 2005 12:38 pm
- Vehicle: NC
- Location: Penrith
- Contact:
Re: AM I USING THE RIGHT OIL?
Give Nulon a ring, they hosted an evening for the NSW MX5 Club last week and had all the information you're looking for on hand - they were extremely helpful and gave all who attended 5ltrs of oil of our choice and some injector cleaner.
-
- Speed Racer
- Posts: 7468
- Joined: Fri Feb 11, 2011 12:49 pm
- Vehicle: NA6
- Location: Purga, QLD
Re: AM I USING THE RIGHT OIL?
Buckshot wrote:Give Nulon a ring, they hosted an evening for the NSW MX5 Club last week and had all the information you're looking for on hand - they were extremely helpful and gave all who attended 5ltrs of oil of our choice and some injector cleaner.
- JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Re: AM I USING THE RIGHT OIL?
Owners manual?
-
- Fast Driver
- Posts: 395
- Joined: Wed Sep 07, 2011 6:41 pm
- Vehicle: NA6
- Location: Melbourne
Re: AM I USING THE RIGHT OIL?
I have a system i use... I use two types of oils. One for winter and one for Summer and those two coincide with the km's of your car.
- taminga16
- Speed Racer
- Posts: 3618
- Joined: Thu Aug 06, 2009 12:22 am
- Vehicle: NC
- Location: Central Victoria
Re: AM I USING THE RIGHT OIL?
Penrite have a very informative web site.
Greg.
Greg.
When you turn your car on, does it return the favour?
- CaptainNate
- Racing Driver
- Posts: 828
- Joined: Sun Aug 05, 2012 10:55 am
- Vehicle: NA6
- Location: Brisbane
- Contact:
Re: AM I USING THE RIGHT OIL?
Very good links, guys! I was just searching for the same thing. I have a bit of a HLA tick at the moment, was going to put in a slightly heavier oil after a full Engine flush but was convinced otherwise by my mechanic friend. The flush worked for a good week or two, but the tick is back
Silver NA6 - [MXV092] - "Scarlett the Pinkbits Warrior" - Join us @ Stance Potato Racing - Non-Pretentious Car Culture!
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: AM I USING THE RIGHT OIL?
You might fine some of those amateurs have already done what you suggested and have the info ready to go.Mr Morlock wrote:I would ring a few of the Oil companies and ask them for a recommendation rather than asking another amateur- all the bigger ones have a free service. The other option is asking a specialist oil supplier who handles a variety of oils.
-
- Speed Racer
- Posts: 3722
- Joined: Sun Jan 18, 2009 10:16 pm
- Vehicle: Non MX-5
- Location: Glasshouse Mountains, QLD
Re: AM I USING THE RIGHT OIL?
It most likely wont be the oil with that mileage. HLAs dont go well past 200,000km.CaptainNate wrote:Very good links, guys! I was just searching for the same thing. I have a bit of a HLA tick at the moment, was going to put in a slightly heavier oil after a full Engine flush but was convinced otherwise by my mechanic friend. The flush worked for a good week or two, but the tick is back
-
- Fast Driver
- Posts: 123
- Joined: Mon Apr 25, 2011 5:48 pm
- Vehicle: NA8
- Location: Melbourne
Re: AM I USING THE RIGHT OIL?
I spoke to Peter on Mobil's tech.line. 1300 466 245. He concurred with my choice of Mobil 1 5W-30 in my car as described on the proviso that the car was not using an excessive amount of oil. He said that a bad new motor could use 100ml per 1,000 km. & be within normal parameters. He said that there was no possibility of excessive wear using such a light oil. I am satisfied with his assessment & will continue to use this oil.
-
- Fast Driver
- Posts: 123
- Joined: Mon Apr 25, 2011 5:48 pm
- Vehicle: NA8
- Location: Melbourne
Re: AM I USING THE RIGHT OIL?
Re Captain Nate's post. I went in an opposite direction to eliminate rattle on start-up. Try a light oil, 5W-30 or 0W-40 & this should fix it. But use a synthetic.
- Charlie Brown
- Speed Racer
- Posts: 2623
- Joined: Mon Apr 28, 2003 11:00 am
- Vehicle: NC
- Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
- Contact:
Re: AM I USING THE RIGHT OIL?
To quiten lifters: http://www.nulon.com.au/products/Engine ... d_Tune-Up/
For all other info on oils and fluids go here and feed in Mazda MX-5, then drill down to your model. http://www.datateck.com.au/lube/NulonAus/Default.asp
For all other info on oils and fluids go here and feed in Mazda MX-5, then drill down to your model. http://www.datateck.com.au/lube/NulonAus/Default.asp
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 133 guests