Has anybody else had this problem before? I think it might be the reverse lock out pin that keeps spinning around on its guide within the box.
Any suggestions
Does anybody have any 6 speed parts or do I just get a complete second hand box?
Cheers
Dave
Cant get Reverse on 6 speed box, Help please
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Driver
- Posts: 76
- Joined: Thu Jan 11, 2007 10:40 pm
- Vehicle: NA8
- Location: Melbourne
Cant get Reverse on 6 speed box, Help please
Stay Sideways
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
Re: Cant get Reverse on 6 speed box, Help please
i know in the 5 speed you leave it in neutral, then put it into 5th then go into reverse from there.
try that.
try that.
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
- Beelzeboss
- Fast Driver
- Posts: 323
- Joined: Tue May 03, 2011 3:59 pm
- Vehicle: Non MX-5
- Location: Sydney
- Contact:
Re: Cant get Reverse on 6 speed box, Help please
16bit wrote:i know in the 5 speed you leave it in neutral, then put it into 5th then go into reverse from there.
On my 5 speed you can't go straight from 5th to neutral, I thought thats when the lockout was active...
Is your clutch fully disengaging? That can make it extremely difficult to get into gear but especially reverse as it doesn't have synchro.
- Okibi
- Speed Racer
- Posts: 10899
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re: Cant get Reverse on 6 speed box, Help please
Loosing reverse on the 6 speed was an issue when mechanics remove the wrong bolt from the gear box when they do an oil change.
Has anyone messed with the gearbox?
Has anyone messed with the gearbox?
If you had access to a car like this, would you take it back right away? Neither would I.
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: Cant get Reverse on 6 speed box, Help please
yeah have you had a recent oil change?
they could have pulled the wrong bolt..if so its a gearbox out job
they could have pulled the wrong bolt..if so its a gearbox out job
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Re: Cant get Reverse on 6 speed box, Help please
Beelzeboss wrote:16bit wrote:i know in the 5 speed you leave it in neutral, then put it into 5th then go into reverse from there.
On my 5 speed you can't go straight from 5th to neutral, I thought thats when the lockout was active...
That's not normal, you should be able to go from any gear directly to neutral, at any time.
I go from 5th directly to neutral then 4th every time I'm slowing down from highway speeds.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
- Beelzeboss
- Fast Driver
- Posts: 323
- Joined: Tue May 03, 2011 3:59 pm
- Vehicle: Non MX-5
- Location: Sydney
- Contact:
Re: Cant get Reverse on 6 speed box, Help please
hks_kansei wrote:beelzeboss wrote:16bit wrote:i know in the 5 speed you leave it in neutral, then put it into 5th then go into reverse from there.
On my 5 speed you can't go straight from 5th to neutral, I thought thats when the lockout was active...
That's not normal, you should be able to go from any gear directly to neutral, at any time.
WOOOPS, massive mistake. I meant to write I can't go from 5th straight to REVERSE
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
Re: Cant get Reverse on 6 speed box, Help please
oh yeah, sorry i meant you go from 5th to reverse as you would from any other gear.
5th neutral then reverse.
it usually open its up for me if it gets sticky.
5th neutral then reverse.
it usually open its up for me if it gets sticky.
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
-
- Driver
- Posts: 76
- Joined: Thu Jan 11, 2007 10:40 pm
- Vehicle: NA8
- Location: Melbourne
Re: Cant get Reverse on 6 speed box, Help please
I have got the gearbox apart at the moment and can see the reverse lock out. No it's not a problem to do with an oil change as I do that myself. The main reason I lost reverse is because I accidentally forced the shifter passed the lock out for reverse when trying to change to 6 th gear at 155 km/h
Stay Sideways
- slimx
- Fast Driver
- Posts: 474
- Joined: Sun Mar 13, 2011 1:12 pm
- Vehicle: NB8B - Turbo
- Location: Sydney (Sth West)
- Contact:
Re: Cant get Reverse on 6 speed box, Help please
is it NOT staying IN GEAR? (like if u HOLD it in REVERSE forcefully with your hand, does it work?)
^^ if this is the case, take it to a local mechanic or gearbox shop, it is an easy fix. I've SEEN IT been done before.
If it's the other way round and not going in, then unfortunately could be a number of things. Depending on how much u find the 2nd hand box for it's probably the best option. Unless you can open the box yourself etc.
^^ if this is the case, take it to a local mechanic or gearbox shop, it is an easy fix. I've SEEN IT been done before.
If it's the other way round and not going in, then unfortunately could be a number of things. Depending on how much u find the 2nd hand box for it's probably the best option. Unless you can open the box yourself etc.
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 108 guests