Took car for a run around the block this morning after install of m-tune re route and thermostat and on lifting the rad cap it was frothing. Let it cool down then did it again. Froth and no bubbles. Surely it must be air and hopefully not a head gasket - seems to much of a coincidence for that (rotrex also installed but but yet to go to boost).
Any ideas?
[img][IMG]http://img200.imageshack.us/img200/8909/avk.JPG[/img]
Uploaded with ImageShack.us[/img]
What is this??
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
trader
- Racing Driver
- Posts: 797
- Joined: Fri Oct 10, 2003 10:41 am
- Vehicle: NB SE
- Location: canberra
What is this??
NB SE, NA 1.8.
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: What is this??
I helped post the images correctly but they were HUUUUUUGE, so see next post.
Dann
Dann
Last edited by NitroDann on Sun Aug 18, 2013 1:28 pm, edited 1 time in total.
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: What is this??
OMG...
Use http://www.postimage.com, and choose resize for 15" monitor next time.
Looks like a head gasket, I bet you went into boost. You should be tuning the ecu and getting used to the process with the belt uninstalled before you even consider fitting the belt.
Dann
Use http://www.postimage.com, and choose resize for 15" monitor next time.
Looks like a head gasket, I bet you went into boost. You should be tuning the ecu and getting used to the process with the belt uninstalled before you even consider fitting the belt.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
Dweezle
- Racing Driver
- Posts: 1923
- Joined: Wed Mar 12, 2008 8:51 am
- Vehicle: NA6
- Location: Sydney
Re: What is this??
Could it possibly be an issue with the reroute you have installed and have now overheated and warped the head?
I assume you would have noticed if the car overheated via the temp gauge though.
Sent from my Nexus 7 using Tapatalk 4
I assume you would have noticed if the car overheated via the temp gauge though.
Sent from my Nexus 7 using Tapatalk 4
ALL MUSCLE CARS ARE CRAP
Jeremy Clarkson
except of course, the Almighty VIPER!!!!
Jeremy Clarkson
except of course, the Almighty VIPER!!!!
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: What is this??
Also Ill point out that the m tuned reroute is expensive, complicated, and there are better cheaper, impossible to F-up aussie options.
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
trader
- Racing Driver
- Posts: 797
- Joined: Fri Oct 10, 2003 10:41 am
- Vehicle: NB SE
- Location: canberra
Re: What is this??
Thanks for that Dann - had trouble with image shack.
Not into the ecu yet just started it and ran it with the FPR it came with.
As for the m-tune it was a bugger to fit but hey it only cost me 100 bucks so couldnt complain.
Not into the ecu yet just started it and ran it with the FPR it came with.
As for the m-tune it was a bugger to fit but hey it only cost me 100 bucks so couldnt complain.
NB SE, NA 1.8.
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: What is this??
trader wrote:Not into the ecu yet just started it and ran it with the FPR it came with.
Honestly though, it does look like a head gasket.
trader wrote:As for the m-tune it was a bugger to fit but hey it only cost me 100 bucks so couldnt complain.
Unless it cost you an engine.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
Sean
- Racing Driver
- Posts: 1755
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB8A
- Location: NSW
- Contact:
Re: What is this??
NitroDann wrote:Unless it cost you an engine.
OUCH! But true...
I concur with the others - Looks like some milky head gasket badness.
When results speak for themselves - don't interrupt.
-
deviant
- Racing Driver
- Posts: 1717
- Joined: Thu Apr 15, 2010 7:23 pm
- Vehicle: NB8B
- Location: Rockingham - Western Australia
Re: What is this??
Is it actually gooey milky stuff or bubbles like there is soap in there?
Is there white goop on your oil filler cap?
Has any of the liquid levels dropped?
Is there white goop on your oil filler cap?
Has any of the liquid levels dropped?
-
trader
- Racing Driver
- Posts: 797
- Joined: Fri Oct 10, 2003 10:41 am
- Vehicle: NB SE
- Location: canberra
Re: What is this??
No goo, filler cap clean, dip stick too. This morning I did a compression test and it showed 145;146;150;145. Also did my 1.8 just to check the guage 139;140;142;145. Its only done 31000 so that prooved nothing.
Seems to have settled done now so maybe it was air pocket in the coolant re route.
Seems to have settled done now so maybe it was air pocket in the coolant re route.
NB SE, NA 1.8.
-
Sean
- Racing Driver
- Posts: 1755
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NB8A
- Location: NSW
- Contact:
Re: What is this??
That's awesome news!
Any chance there was some sort of muck on the inside of the reroute form manufacturing? Worth a flush refill and bleed perhaps?
Any chance there was some sort of muck on the inside of the reroute form manufacturing? Worth a flush refill and bleed perhaps?
When results speak for themselves - don't interrupt.
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 134 guests
![[IMG]http://img200.imageshack.us/img200/8909/avk.JPG[/img]](http://imageshack.us/photo/my-images/200/avk.JPG/){kind=link}