Hi All,
I just lost my left side low beam head light on the way home. High beams work perfectly on both side
I've checked all the related fuses, all look ok. Bulbs are fine too.
I've also checked the voltage on the connector and got 12V on both low beam and high beam wires.
Any suggestions?
Low beam problem on NA6
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
popopocky
- Driver
- Posts: 49
- Joined: Thu Jun 03, 2010 10:49 pm
- Vehicle: NA6
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: Low beam problem on NA6
bulb.
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: Low beam problem on NA6
NitroDann wrote:bulb.
yep
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
popopocky
- Driver
- Posts: 49
- Joined: Thu Jun 03, 2010 10:49 pm
- Vehicle: NA6
Re: Low beam problem on NA6
Thanks guys!
Just double checked with another set of bulb and its alive
.
Just double checked with another set of bulb and its alive
.-
93_Clubman
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Low beam problem on NA6
Filament coating often deteriorates, without breaking, to the point it won't work. Both sides of mine did this within about a year of each other.
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 68 guests
