Cheap ebay 'Empire Performance' extractors anyone?
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- tooch
- Driver
- Posts: 77
- Joined: Wed Nov 07, 2012 4:49 pm
- Vehicle: NA8
- Location: Melbourne
Cheap ebay 'Empire Performance' extractors anyone?
Anybody have any first hand experience with these?
http://www.ebay.com.au/itm/Empire-Perfo ... 668wt_1397
The price is certainly right, I wasn't even considering extractors at this stage but it's almost worth doing for $234.
http://www.ebay.com.au/itm/Empire-Perfo ... 668wt_1397
The price is certainly right, I wasn't even considering extractors at this stage but it's almost worth doing for $234.
-
- Racing Driver
- Posts: 533
- Joined: Mon May 19, 2003 11:00 am
- Vehicle: NA6
- Location: Adelaide
- Contact:
Re: Cheap ebay 'Empire Performance' extractors anyone?
look like every other ebay extractor available. id make sure the fitting for the O2 sensor is threaded correctly, the ebay one i bought many many years ago was threaded wrong. remember to degrease the thing before you start the engine up too, otherwise your finger prints will be permanently etched into them forever.. ask me how i know this
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: Cheap ebay 'Empire Performance' extractors anyone?
Cheap and Ebay means junk. When was the last time you purchased a 'no name' item from ebay and it was rubbish.
- Steampunk
- Speed Racer
- Posts: 4670
- Joined: Wed Oct 10, 2007 9:16 am
- Vehicle: NA6
- Location: Southside of Breeze-bane
Re: Cheap ebay 'Empire Performance' extractors anyone?
very general and rather unfair comment bruce. I've seen/inspected several "cheap" exhaust systems laid side-by-side with expensive AutoExe et al, and the only thing that can be "wrong" with the cheaper product is perhaps they use a cheaper metal, but obviously you can't tell by sight. Fitment and welds are comparable.
I bought a "cheap" radiator (Fenix), as have many others, and they've had little to no problems whereas others who equate quality with price have bought PWR and have had fitment issues.
Many people laud X-Force products....
I bought a "cheap" radiator (Fenix), as have many others, and they've had little to no problems whereas others who equate quality with price have bought PWR and have had fitment issues.
Many people laud X-Force products....
- tooch
- Driver
- Posts: 77
- Joined: Wed Nov 07, 2012 4:49 pm
- Vehicle: NA8
- Location: Melbourne
Re: Cheap ebay 'Empire Performance' extractors anyone?
Cheers guys
Bruce: I've bought HEAPS of cheap ebay car stuff over the years, and aside from the occasional fitting issue at first (which usually just requires minor adjustments), most of it's been great
Used to have a cheap ebay downpipe on my old Celica GT-Four, never cracked in the several years I had it fitted. Had a short shift kit on my MR2 which worked great. Both of these items were likely Chinese 'replicas' of FAR more expensive items.
Might give one of these systems a go if I have some cash left over after Xmas, $234 isn't much money to try something
Bruce: I've bought HEAPS of cheap ebay car stuff over the years, and aside from the occasional fitting issue at first (which usually just requires minor adjustments), most of it's been great
Used to have a cheap ebay downpipe on my old Celica GT-Four, never cracked in the several years I had it fitted. Had a short shift kit on my MR2 which worked great. Both of these items were likely Chinese 'replicas' of FAR more expensive items.
Might give one of these systems a go if I have some cash left over after Xmas, $234 isn't much money to try something
- Okibi
- Speed Racer
- Posts: 10899
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re: Cheap ebay 'Empire Performance' extractors anyone?
I bought my WRX exhaust of Dyl and it had to be modified to fit but in the end it was a cheaper solution than a locally made exhaust.
I'm not sure if there are from the same supplier but I could find out.
I'm not sure if there are from the same supplier but I could find out.
If you had access to a car like this, would you take it back right away? Neither would I.
-
- Fast Driver
- Posts: 338
- Joined: Mon Jun 04, 2012 7:04 pm
- Vehicle: NB8B
- Location: Brisbane
- Contact:
Re: Cheap ebay 'Empire Performance' extractors anyone?
These cheap eBay extractors sold,,,
if they are a forum member love to hear some feedback, definitely good value if hey do what they should ?
if they are a forum member love to hear some feedback, definitely good value if hey do what they should ?
98 NB8A Grace Green
LS 66.17,QR Club 69.27, QRSpr 63.58 SOLD
01 NB8B Grace Green
LS 64.66,QRNat 1.31.94,QR Club 65.17 QRSpr 62.36
93 NA8 Clubman
LS 66.17,QR Club 69.27, QRSpr 63.58 SOLD
01 NB8B Grace Green
LS 64.66,QRNat 1.31.94,QR Club 65.17 QRSpr 62.36
93 NA8 Clubman
-
- Fast Driver
- Posts: 364
- Joined: Tue Jul 17, 2012 9:41 pm
- Vehicle: NC - LE
- Location: West Brisbane
Re: Cheap ebay 'Empire Performance' extractors anyone?
just bought a set today for under 200 on ebay, will let you know how they go.
-
- Driver
- Posts: 71
- Joined: Mon Jul 29, 2013 4:38 pm
- Vehicle: NA6
- Location: Perth NOR
Re: Cheap ebay 'Empire Performance' extractors anyone?
Hi guys,
The "Empire Performance" is a bit of a newie here in Perth, from what I understand it's been started up by a well known Nissan enthusiast to provide china based cheap performance parts with as much quality as is possible at the price. I fitted an exhaust to a 180sx drift car a few weeks back and couldn't find anything overly wrong with quality and fitted just fine .
I am a sucker for a sexy weld though, makes me all giddy
The "Empire Performance" is a bit of a newie here in Perth, from what I understand it's been started up by a well known Nissan enthusiast to provide china based cheap performance parts with as much quality as is possible at the price. I fitted an exhaust to a 180sx drift car a few weeks back and couldn't find anything overly wrong with quality and fitted just fine .
I am a sucker for a sexy weld though, makes me all giddy
-
- Fast Driver
- Posts: 364
- Joined: Tue Jul 17, 2012 9:41 pm
- Vehicle: NC - LE
- Location: West Brisbane
Re: Cheap ebay 'Empire Performance' extractors anyone?
Well he should go gangbusters $155 for extractors/headers is cheap. My theory is more to test if cheap=quality. should be interesting.
- MrRevhead
- Racing Driver
- Posts: 715
- Joined: Mon Mar 26, 2012 2:40 pm
- Vehicle: NA6
- Location: NW Sydney
Re: Cheap ebay 'Empire Performance' extractors anyone?
Looking forward to hearing a review on quality, fit and sound (video if possible) once you have it installedmazdaz wrote:Well he should go gangbusters $155 for extractors/headers is cheap. My theory is more to test if cheap=quality. should be interesting.
1991 NA6 BRG Limited Edition #124 (Aus Delivered)
-
- Racing Driver
- Posts: 797
- Joined: Fri Oct 10, 2003 10:41 am
- Vehicle: NB SE
- Location: canberra
Re: Cheap ebay 'Empire Performance' extractors anyone?
I bought a no name set off eBay at least 6 years ago. they were stainless and I got them coated which brought them up to the price of named ones. Have performed flawlessly. Now going for more power so have put a gearbox bracket on them.
NB SE, NA 1.8.
-
- Fast Driver
- Posts: 364
- Joined: Tue Jul 17, 2012 9:41 pm
- Vehicle: NC - LE
- Location: West Brisbane
Re: Cheap ebay 'Empire Performance' extractors anyone?
quick update...said cheap ebay extractors are "lost in the mail"......they were sent to syd from pth I am in bne???
Anyway they may turn up.
Anyway they may turn up.
-
- Racing Driver
- Posts: 750
- Joined: Mon Jul 29, 2013 8:47 pm
- Vehicle: NC
- Location: Sydney
Re: Cheap ebay 'Empire Performance' extractors anyone?
mazdaz wrote:quick update...said cheap ebay extractors are "lost in the mail"......they were sent to syd from pth I am in bne???
Anyway they may turn up.
Hope mine do not end up in Brisbane..
NB8A| WP 1:15.6 | SMP-S 1:08.56 | SMP-N 1:21.35
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288
- wozzah1975
- Fast Driver
- Posts: 336
- Joined: Sun Oct 30, 2011 11:39 pm
Re: Cheap ebay 'Empire Performance' extractors anyone?
As with alot of cheap units, the collectors aren't done correctly. A decent set will get you a marginal increase, so a set like this you're unlikely to even feel the difference and it would be debatable whether there even was a positive difference. Stick to buying ones that work and save yourself the headache.
Woz
Woz
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292
www.facebook.com/pages/Warren-Heath-Per ... 4779879292
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 103 guests