Hi.
Have you thoroughly checked that you do not have a leaking manifold gasket?
NA6 X-Force Headers = RAAAAASSSPPPPPP!
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Fast Driver
- Posts: 423
- Joined: Thu May 19, 2011 11:10 am
- Vehicle: ND - 2
- Location: brisbane
- jules
- Guitar Hero
- Posts: 3562
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Sydney, previously HQ - GC Dodgy Inc.
- Contact:
Re: NA6 X-Force Headers = RAAAAASSSPPPPPP!
Full Loch system and yes, it is raspy in some rev ranges. The power bump made it worth while.
Founder of the Gold Coast Chapter of the Honourable Brothers of Dodgy.
- timk
- Racing Driver
- Posts: 1928
- Joined: Fri Dec 31, 2004 3:16 pm
- Vehicle: NC
Re: NA6 X-Force Headers = RAAAAASSSPPPPPP!
On the supercharged NB I managed to kill most of it with an 'Aero' resonator, the yanks use them on E46 M3s for the same thing. It was still raspy when cold (was fine when warmed up), and the resonator had pretty thin walls so cracked a couple of times.
Could be worth looking at?
Could be worth looking at?
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
Re: NA6 X-Force Headers = RAAAAASSSPPPPPP!
nb8a bp is mind.
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
-
- Driver
- Posts: 90
- Joined: Thu Nov 17, 2011 10:57 pm
Re: NA6 X-Force Headers = RAAAAASSSPPPPPP!
dríven it quite a few more times now since the install and I think I'm getting used to it.
The sound with the top down is ok. Top up is still a bit annoying but for the performance gains, I can live with it.
The sound with the top down is ok. Top up is still a bit annoying but for the performance gains, I can live with it.
- slug_dub
- Racing Driver
- Posts: 1228
- Joined: Fri Jun 19, 2009 11:02 pm
- Vehicle: NA8
- Location: Brisbane
- Contact:
Re: NA6 X-Force Headers = RAAAAASSSPPPPPP!
16bit wrote:nb8a bp is mind.
I don't know what you've said here for some reason but out of context, I like it
I got a bit worried after this thread that the sound would go a bit crazy when I fit a stainless manifold this weekend but if anything the car has gotten quieter which I wasn't expecting... they are wrapped though.
I was going to take the wrapping off as I read it wasn't a good idea to wrap them but they came to me that way and had been used with the wrapping previously...
The American wrote:hella sic stance flushing pard harker yolo something something.
-
- Fast Driver
- Posts: 395
- Joined: Wed Sep 07, 2011 6:41 pm
- Vehicle: NA6
- Location: Melbourne
Re: NA6 X-Force Headers = RAAAAASSSPPPPPP!
what extractors did you get?
- slug_dub
- Racing Driver
- Posts: 1228
- Joined: Fri Jun 19, 2009 11:02 pm
- Vehicle: NA8
- Location: Brisbane
- Contact:
Re: NA6 X-Force Headers = RAAAAASSSPPPPPP!
Maxim Works
The American wrote:hella sic stance flushing pard harker yolo something something.
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 118 guests