Hi guys,
I have broken one of the studs that holds my sway bar to my chassis :-(
Is this something I can fix at home and how do I go about it?? Just bash the crap out of it till it comes or what?? Please help!!!!!! :-(
Cheers ,
Ben
broken sway bar mount, please help
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
mmx005
- Fast Driver
- Posts: 242
- Joined: Tue Feb 22, 2005 8:04 pm
- Vehicle: NB8A
- Location: central coast
- Contact:
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: broken sway bar mount, please help
Take it to a good mechanic.
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
TieNN89
- Speed Racer
- Posts: 2012
- Joined: Mon Nov 26, 2007 8:27 pm
- Vehicle: NC
- Location: Brisbane
- Contact:
Re: broken sway bar mount, please help
What year?
Front or Rear?
Got pictures?
Front or Rear?
Got pictures?
-
Steampunk
- Speed Racer
- Posts: 4670
- Joined: Wed Oct 10, 2007 9:16 am
- Vehicle: NA6
- Location: Southside of Breeze-bane
Re: broken sway bar mount, please help
Is it the bolt on one of the D-bush bracket?
If so, carefully drill it out and replace the bolt.
Use easy-outs if you have access to them.
If so, carefully drill it out and replace the bolt.
Use easy-outs if you have access to them.
-
mmx005
- Fast Driver
- Posts: 242
- Joined: Tue Feb 22, 2005 8:04 pm
- Vehicle: NB8A
- Location: central coast
- Contact:
Re: broken sway bar mount, please help
Sorry guys, posted in a bit of a flap.
It's an nb8a, driver's side rear stud. Feels like its flat on the back. Is it a screw in type of stud or a pressed one?? I had thought about drilling it out and putting a bolt in place of the stud, but wasn't sure if it would hold/ be that simple.
yes the one that holds the D Bush in place.
It's an nb8a, driver's side rear stud. Feels like its flat on the back. Is it a screw in type of stud or a pressed one?? I had thought about drilling it out and putting a bolt in place of the stud, but wasn't sure if it would hold/ be that simple.
yes the one that holds the D Bush in place.
-
timk
- Racing Driver
- Posts: 1928
- Joined: Fri Dec 31, 2004 3:16 pm
- Vehicle: NC
Re: broken sway bar mount, please help
mmx005 wrote:It's an nb8a, driver's side rear stud. Feels like its flat on the back. Is it a screw in type of stud or a pressed one?? I had thought about drilling it out and putting a bolt in place of the stud, but wasn't sure if it would hold/ be that simple.
I had the same thing happen to my 89 NA, and I did exactly what you have suggested. I used Loctite on it but that was probably overkill.
-
A.Chen89
- Racing Driver
- Posts: 509
- Joined: Thu Jun 10, 2010 6:09 pm
- Vehicle: NB8B - Turbo
- Location: Western Sydney
Re: broken sway bar mount, please help
Drill it out and replace with a nut and bolt as above. Had it happen on my last car
-
mmx005
- Fast Driver
- Posts: 242
- Joined: Tue Feb 22, 2005 8:04 pm
- Vehicle: NB8A
- Location: central coast
- Contact:
Re: broken sway bar mount, please help
I ended up drilling my stud out last night, was relatively easy. Was quite surprised.
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 336 guests
