If anyone has one of the SE Turbo support brackets that bolts to the bottom of the turbo to the engine mount just laying around, could you get the dimensions of it and PM them to me please as I haven't been able to locate one and it's just too hard to measure up for an arthritic old fart without a pit.
Mike
SE Bottom Turbo Support Bracket.
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
-
Jaxom_2
- Fast Driver
- Posts: 131
- Joined: Sat Dec 24, 2005 8:25 pm
- Vehicle: NB8B - Turbo
- Location: Adelaide, South Australia
- Contact:
SE Bottom Turbo Support Bracket.
2002 with a Kraftwerks C30-74 Rotrex Kit zooom frick'n zooom
-
Jaxom_2
- Fast Driver
- Posts: 131
- Joined: Sat Dec 24, 2005 8:25 pm
- Vehicle: NB8B - Turbo
- Location: Adelaide, South Australia
- Contact:
Re: SE Bottom Turbo Support Bracket.
Mmmmm it's not necessary any more, destroyed the motor yesterday, bugga
some holes in both sides of the block, and the sump.
On the bright side - I can fabricate a bracket with the motor on a bench.
All I need now is a motor. bugga
See new post in wanted section
some holes in both sides of the block, and the sump.
On the bright side - I can fabricate a bracket with the motor on a bench.
All I need now is a motor. bugga
See new post in wanted section
2002 with a Kraftwerks C30-74 Rotrex Kit zooom frick'n zooom
-
timk
- Racing Driver
- Posts: 1928
- Joined: Fri Dec 31, 2004 3:16 pm
- Vehicle: NC
Re: SE Bottom Turbo Support Bracket.
Sorry I didn't see this earlier, and sorry to hear about your engine. Just in case anyone else searches in the future, and it may be of some benefit to you, here we go:
-
Jaxom_2
- Fast Driver
- Posts: 131
- Joined: Sat Dec 24, 2005 8:25 pm
- Vehicle: NB8B - Turbo
- Location: Adelaide, South Australia
- Contact:
Re: SE Bottom Turbo Support Bracket.
Thank you for that, I can still use the information while I start building another motor.
2002 with a Kraftwerks C30-74 Rotrex Kit zooom frick'n zooom
-
Okibi
- Speed Racer
- Posts: 10899
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Re: SE Bottom Turbo Support Bracket.
Tim if you can measure the rest I can create a PDF that could be used as a template.
You do not have the required permissions to view the files attached to this post.
If you had access to a car like this, would you take it back right away? Neither would I.
-
timk
- Racing Driver
- Posts: 1928
- Joined: Fri Dec 31, 2004 3:16 pm
- Vehicle: NC
-
Jaxom_2
- Fast Driver
- Posts: 131
- Joined: Sat Dec 24, 2005 8:25 pm
- Vehicle: NB8B - Turbo
- Location: Adelaide, South Australia
- Contact:
Re: SE Bottom Turbo Support Bracket.
Thank you for the drawings, they will come in handy later, my priorities have change a bit 
I need to build a motor to put it on first.
Mike
I need to build a motor to put it on first.
Mike
2002 with a Kraftwerks C30-74 Rotrex Kit zooom frick'n zooom
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: Bing [Bot] and 248 guests
