NA8 engine bay question

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

emily_mx5
Racing Driver
Posts: 1720
Joined: Wed Aug 03, 2011 5:57 pm
Vehicle: NB SE
Location: Sydney

NA8 engine bay question

Postby emily_mx5 » Thu Jun 13, 2013 10:52 pm

Hi guys, I know the NA6 engine bay and components like the back of my hand, but in my new NA8 there are new additions that i dont recognise. these 3 relays, and a large orange plug, that is unplugged :shock:
(1995 aus delivered NA8 with an NB8A engine if that helps)

Image

what are they? :lol:
thanks :)

sailaholic
Speed Racer
Posts: 3511
Joined: Thu May 19, 2011 3:38 pm
Vehicle: NA8
Location: Brisbane

Re: NA8 engine bay question

Postby sailaholic » Fri Jun 14, 2013 6:45 am

Relays look aftermarket. Will try and get out to the shed to take a look at the plug.

Sent from my GT-I9100 using Tapatalk 2

User avatar
Smacca
Fast Driver
Posts: 205
Joined: Wed Oct 29, 2008 1:33 am
Vehicle: Clubman
Location: NSW Central Coast

Re: NA8 engine bay question

Postby Smacca » Fri Jun 14, 2013 10:25 am

Here is a photo of my stock NA8 (no power steer). Sorry for the low lighting - my apartment garage is pretty dingy.

You're right; your three relays are definitely new additions. I have two relays which plug directly into the large orange plug. The same end of the plug is also wired to the driver side thermo fan and a sensor on a metal line (air con/cooling?) under the intake manifold. The opposite end of the orange plug connects below to a main wiring loom which also runs to the driver side headlight and indicator. Sorry I'm no auto electrician, but I hope this helps a little.

Image

emily_mx5
Racing Driver
Posts: 1720
Joined: Wed Aug 03, 2011 5:57 pm
Vehicle: NB SE
Location: Sydney

Re: NA8 engine bay question

Postby emily_mx5 » Fri Jun 14, 2013 11:27 am

Thanks so much for those details, I will investigate where my wires run to tonight.

User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Re: NA8 engine bay question

Postby Lokiel » Fri Jun 14, 2013 1:12 pm

These look like like A/C and fan relays on my NB.
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716

93_Clubman
Speed Racer
Posts: 11856
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: NA8 engine bay question

Postby 93_Clubman » Fri Jun 14, 2013 4:25 pm

Em, I don't have those three relays in my '93 NA8.

Smacca, I did know what those two relays were (could be what Lokiel says), but mine doesn't have them, then again mine doesn't have AC.

User avatar
Smacca
Fast Driver
Posts: 205
Joined: Wed Oct 29, 2008 1:33 am
Vehicle: Clubman
Location: NSW Central Coast

Re: NA8 engine bay question

Postby Smacca » Fri Jun 14, 2013 7:40 pm

93_Clubman wrote:Smacca, I did know what those two relays were (could be what Lokiel says), but mine doesn't have them, then again mine doesn't have AC.


Ah, mine does have air con so that's probably it then. Like Lokiel said, one for the air con, the other for the fans.

User avatar
Boyracer
MX-5 Encyclopedia
Posts: 2568
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NC
Location: Silverdale.NSW
Contact:

Re: NA8 engine bay question

Postby Boyracer » Fri Jun 14, 2013 10:10 pm

Big plug is for headlights/retractor motors, I'd say they have rewired the headlights and added the relays.
NC Roadie, NC Racey, ND Racey….and a 30AE

Plus several others in the bone yard...


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 121 guests