Post your turbo / supercharged setup

Postby **NitroDann** » Sun Jan 27, 2013 8:07 am

Na06ce: a spec sheet in a magazine and online isn't the same as active conversation about a build or builds.
I was not talking about your car I was talking about people who have made claims with no proof ever, they know who they are.

I am sorry that so many take open discussion on the Internet so personally that they feel they cannot contribute any longer. I can probably still dig up PMs sent to me from members who have left because they were sick of the preciousness.

You have not over stepped any line opinions are free to be given.

Dann

Postby **Okibi** » Mon Jan 28, 2013 5:20 pm

If you're taking a photos of your forced induction setup please remember you've got 3 days left to enter it into the current ImportBible photo competition

http://mx5cartalk.com/forum/viewtopic.php?f=18&t=55605

Hjt · Postby **Hjt** » Mon Jan 28, 2013 6:24 pm

I love your vehicle na06ce. Faster than my damn SP

Tensa Zangetsu · Postby **Tensa Zangetsu** » Tue Apr 02, 2013 8:46 pm

Sorry about the stupid question guys but im having a blonde moment with this and have searched around for days now and keep coming up dry.

MrRevhead · Postby **MrRevhead** » Tue Apr 02, 2013 9:06 pm

You need to run a hose between the nipple on the wastegate actuator and the housing, like you marked out in your pic. If you were to run a boost controller/bleed boost, you would attach it to that hose. No hose = max boost that the actuator/wastgate is set at, usually not safe as there's no restriction/control of boost pressure.

As for the boost gauge, you need to run it from a gradual vacuum line (usually the ones connected to the inlet manifold/throttle body). Usually a t-piece can be used to plumb the line into the vacuum hose.

Postby **NitroDann** » Tue Apr 02, 2013 9:09 pm

Open a fresh thread to discuss ti in the turbo section of the forum.

Dann

Tensa Zangetsu · Postby **Tensa Zangetsu** » Wed Apr 03, 2013 6:51 am

Thanks mrrevhead, and sorry dann, i didn't wanna start a new thread just incase there was already one for it, i'll make one now cause im still abit confused about what hoses go where.