Nb brake pads

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

narita
Racing Driver
Posts: 657
Joined: Sun Dec 02, 2012 7:27 pm
Vehicle: NB Roadster

Nb brake pads

Postby narita » Mon May 13, 2013 7:58 pm

Now, this is a story all about how
My pad choice got flipped-turned upside down
And I'd like to take a minute
Just sit right there
I'll tell you how I became confused about wear

In various other websites the question was raised
On the forums where I spent most of my days 
Chilling out, maxing, reclining back far
And all reading up on the options for my car  
When a couple of guys, they could be misunderstood
Started making claims about the EBC greens
I read a few little post by some american lads
They said "they bite no harder than stock miata pads"

So I went for a jumped in the car
I went down and saw mx5 centre, not very far
They said they had project mu and if anything I could say that this pad was rare
But I though nah forget it ill ask the question here!
NitroDann wrote:No one cares for your faux JDM posh lifestyle.

Dann


WINTON PB - 1:57.4000

User avatar
MrRevhead
Racing Driver
Posts: 715
Joined: Mon Mar 26, 2012 2:40 pm
Vehicle: NA6
Location: NW Sydney

Re: Nb brake pads

Postby MrRevhead » Mon May 13, 2013 8:07 pm

There is this thing it's called search,
It is recommended that people use it first.

Since you haven't, let me make this clear,
What you are looking for can be found right here:

http://mx5cartalk.com/forum/viewtopic.php?f=18&t=57500

http://mx5cartalk.com/forum/search.php?keywords=brake+pads+recommend&terms=all&author=&fid%5B%5D=30&sc=1&sf=all&sk=t&sd=d&sr=topics&st=0&ch=300&t=0&submit=Search
1991 NA6 BRG Limited Edition #124 (Aus Delivered)
Image

narita
Racing Driver
Posts: 657
Joined: Sun Dec 02, 2012 7:27 pm
Vehicle: NB Roadster

Re: Nb brake pads

Postby narita » Mon May 13, 2013 8:15 pm

Image
NitroDann wrote:No one cares for your faux JDM posh lifestyle.

Dann


WINTON PB - 1:57.4000

maxgus
Fast Driver
Posts: 364
Joined: Tue May 29, 2012 10:35 pm
Vehicle: NB8A - Supercharged
Location: Brisbane North

Re: Nb brake pads

Postby maxgus » Tue May 14, 2013 2:14 pm

Ebc greens are expensive crap. I just replaced a set with QFM performance pads and I am impressed by them already! The EBC greens were hard noisy, dusty and didn't bite until very warm. I would get In contact with the guys at brakes direct. They were super friendly and helpful. Set of front QFM pads cost $79 plus postage.
Feather weight

User avatar
Mr nanotech
Racing Driver
Posts: 1487
Joined: Sat Jan 23, 2010 4:35 pm
Vehicle: NA6
Location: Rotting away in the 'Greater' City of Geelong...
Contact:

Re: Nb brake pads

Postby Mr nanotech » Tue May 14, 2013 7:05 pm

I like my greens to be honest. I got them for hardly anything off ebay UK. They worked out half the price of any other pad including shipping.
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons. :roll:

narita
Racing Driver
Posts: 657
Joined: Sun Dec 02, 2012 7:27 pm
Vehicle: NB Roadster

Re: Nb brake pads

Postby narita » Wed May 15, 2013 12:37 am

maxgus wrote:Ebc greens are expensive crap. I just replaced a set with QFM performance pads and I am impressed by them already! The EBC greens were hard noisy, dusty and didn't bite until very warm. I would get In contact with the guys at brakes direct. They were super friendly and helpful. Set of front QFM pads cost $79 plus postage.


Would the heat up issue be an issue on track as id expect to need to heat these for street?
NitroDann wrote:No one cares for your faux JDM posh lifestyle.

Dann


WINTON PB - 1:57.4000

narita
Racing Driver
Posts: 657
Joined: Sun Dec 02, 2012 7:27 pm
Vehicle: NB Roadster

Re: Nb brake pads

Postby narita » Wed May 15, 2013 12:38 am

Mr nanotech wrote:I like my greens to be honest. I got them for hardly anything off ebay UK. They worked out half the price of any other pad including shipping.


I have placed an order with a local trusted shop.

Will let you know how they go. Reviews seem to be 50/50.
NitroDann wrote:No one cares for your faux JDM posh lifestyle.

Dann


WINTON PB - 1:57.4000

User avatar
Mr nanotech
Racing Driver
Posts: 1487
Joined: Sat Jan 23, 2010 4:35 pm
Vehicle: NA6
Location: Rotting away in the 'Greater' City of Geelong...
Contact:

Re: Nb brake pads

Postby Mr nanotech » Wed May 15, 2013 1:46 am

Greens are what Jace and I run. They don't need much heat in them to be honest. normal driving temps on the street and they work as good as any other street pad, when you start getting aggressive on the brakes they get a lot better though. Good bang for buck as you can get them heaps cheaper than Bendix pads etc
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons. :roll:

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Nb brake pads

Postby NitroDann » Wed May 15, 2013 1:52 am

narita wrote:Now, this is a story all about how
My pad choice got flipped-turned upside down
And I'd like to take a minute
Just sit right there
I'll tell you how I became confused about wear

In various other websites the question was raised
On the forums where I spent most of my days 
Chilling out, maxing, reclining back far
And all reading up on the options for my car  
When a couple of guys, they could be misunderstood
Started making claims about the EBC greens
I read a few little post by some american lads
They said "they bite no harder than stock miata pads"

So I went for a jumped in the car
I went down and saw mx5 centre, not very far
They said they had project mu and if anything I could say that this pad was rare
But I though nah forget it ill ask the question here!


:BROADY:
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

fcruz3r
Fast Driver
Posts: 222
Joined: Sun Feb 10, 2013 10:28 pm
Vehicle: NB8B
Location: Perth WA

Re: Nb brake pads

Postby fcruz3r » Wed May 15, 2013 1:53 am

I've got ebc yellows and can highly recommend these pads. Great grip from cold with zero squeal. Not sure how the hold up on the track, coz the car is still a work in progress. Very easy to modulate as well. Comparing price n performance, would rate these better than the ferodo ds2500 on my other car. Only downside is they dust more than stock, but I don't mind it coz I wash the car every week n it doesn't chew on the rotors.

Cheap too from mx5 parts uk

User avatar
Mr nanotech
Racing Driver
Posts: 1487
Joined: Sat Jan 23, 2010 4:35 pm
Vehicle: NA6
Location: Rotting away in the 'Greater' City of Geelong...
Contact:

Re: Nb brake pads

Postby Mr nanotech » Wed May 15, 2013 3:06 am

Ohhhh yes I forgot. Mega dust! My wheels went from polished to black real quick
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons. :roll:

narita
Racing Driver
Posts: 657
Joined: Sun Dec 02, 2012 7:27 pm
Vehicle: NB Roadster

Re: Nb brake pads

Postby narita » Wed May 15, 2013 10:21 am

Not too concerned about dust luckily.

Also how important is it to match or upgrade rear pads.

The plan is to go greens on the front and oem on rear.
NitroDann wrote:No one cares for your faux JDM posh lifestyle.

Dann


WINTON PB - 1:57.4000

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: Nb brake pads

Postby manga_blue » Wed May 15, 2013 1:35 pm

narita wrote:Also how important is it to match or upgrade rear pads.

The plan is to go greens on the front and oem on rear.
I think you should be right. It's less important if you've got ABS, which I assume you have. Problems come when you have wildly mismatched pads and no ABS, e.g. race pads front which only work hot and OEM pads rear which grab well cold so that the whole balance of braking changes constantly.
’95 NA8

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: Nb brake pads

Postby hks_kansei » Wed May 15, 2013 1:50 pm

My fronts are Axxis
Rears are Raybestos

They work 100x better than my old pads, which were OEM backing plates.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: Google [Bot] and 279 guests