Hi.
Would anybody know if there is a difference in the free lengths of valve springs in the 1.6 and 1.8 engines please. The lengths if known would help me.
valve spring lenghts
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
ralt
- Fast Driver
- Posts: 423
- Joined: Thu May 19, 2011 11:10 am
- Vehicle: ND - 2
- Location: brisbane
-
manga_blue
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: valve spring lenghts
NA8:
free length IN and EX 46.26mm,
min length 39.5mm under a fixed load of 22.8 to 25.8 Kgf
NA6:
free length IN 48.0 mm / EX 48.3 mm EX,
min length IN 40.0 mm at 22.1 to 25.1 Kgf / EX 40.0 at 17.7 to 20.0 Kgf
So slightly different. Call Performance Springs in Qld if you want replacements: best and cheapest.
free length IN and EX 46.26mm,
min length 39.5mm under a fixed load of 22.8 to 25.8 Kgf
NA6:
free length IN 48.0 mm / EX 48.3 mm EX,
min length IN 40.0 mm at 22.1 to 25.1 Kgf / EX 40.0 at 17.7 to 20.0 Kgf
So slightly different. Call Performance Springs in Qld if you want replacements: best and cheapest.
’95 NA8
-
ralt
- Fast Driver
- Posts: 423
- Joined: Thu May 19, 2011 11:10 am
- Vehicle: ND - 2
- Location: brisbane
Re: valve spring lenghts
Hi.
Thank you manga blue for the information
Thank you manga blue for the information
-
manga_blue
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: valve spring lenghts
No problem. FWIW I had 2 sets of NA8 springs, both with about 170,000kms on them. 2 springs out of 32 passed the loaded length test.
’95 NA8
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 49 guests
