Though I'd share this. One of the guys in my club liked my BP conversion so much he has done one himself, except this one is turbod
Basically, the engine is a BP 1.8. Internally it has forged rods and pistons (eagles and wiseco from memory), block done by himself, and is fitted with one of my std valve head and mild cam packages. It runs a Brae Fabrications Exhaust manifold with a TDO5 20G Turbo fitted. It has taken a little bit of getting to it's current state, but now it's a screamer.
260rwkw on 24lbs on a 7200rpm limiter to date. This is a video of one of the earlier runs on less boost.
https://www.facebook.com/photo.php?v=10 ... =2&theater
Cheers
Woz
My latest BP 1.8 dyno results
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- wozzah1975
- Fast Driver
- Posts: 336
- Joined: Sun Oct 30, 2011 11:39 pm
My latest BP 1.8 dyno results
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292
www.facebook.com/pages/Warren-Heath-Per ... 4779879292
-
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: My latest BP 1.8 dyno results
So ... beware of white (or is it silver?) Escorts then! Couldn't you get the top 3rd of the curve a bit flatter?
’95 NA8
- MrRevhead
- Racing Driver
- Posts: 715
- Joined: Mon Mar 26, 2012 2:40 pm
- Vehicle: NA6
- Location: NW Sydney
Re: My latest BP 1.8 dyno results
What a super clean MK2 Escort with power to boot to match! (although, I will always have a soft spot for MK1's after seeing Geoff Newton's Cosworth powered one in the 90's )
I will be interested to hear what he pulls down the quarter if he does a run in the future.
I will be interested to hear what he pulls down the quarter if he does a run in the future.
Last edited by MrRevhead on Mon Apr 22, 2013 8:11 pm, edited 3 times in total.
1991 NA6 BRG Limited Edition #124 (Aus Delivered)
- wozzah1975
- Fast Driver
- Posts: 336
- Joined: Sun Oct 30, 2011 11:39 pm
Re: My latest BP 1.8 dyno results
manga_blue wrote:So ... beware of white (or is it silver?) Escorts then! Couldn't you get the top 3rd of the curve a bit flatter?
Yes, beware! I'm not doing the tuning on this one, someone else is. It has been back since for a tidy up, and there are still some minor issues to sort I believe.
Cheers
Woz
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292
www.facebook.com/pages/Warren-Heath-Per ... 4779879292
- wozzah1975
- Fast Driver
- Posts: 336
- Joined: Sun Oct 30, 2011 11:39 pm
Re: My latest BP 1.8 dyno results
wozzah1975 wrote:manga_blue wrote:So ... beware of white (or is it silver?) Escorts then! Couldn't you get the top 3rd of the curve a bit flatter?
Yes, beware! I'm not doing the tuning on this one, someone else is. It has been back since for a tidy up, and there are still some minor issues to sort I believe.
Cheers
Woz
I think it's flatter now!! lol
Woz
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292
www.facebook.com/pages/Warren-Heath-Per ... 4779879292
- Eeyore
- Driver
- Posts: 88
- Joined: Tue Apr 09, 2013 8:26 pm
- Vehicle: Clubman
- Location: Ipswich, QLD
Re: My latest BP 1.8 dyno results
I'm looking to do a similar build with a new GTX2863R. I need to select the right cams for the job though. Aiming for 250rwkw.
Kurt
1971 1300 Estate Deluxe
1973 1300 Wagon
1979 RX7
1971 1300 Estate Deluxe
1973 1300 Wagon
1979 RX7
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: My latest BP 1.8 dyno results
Good job wozzah, see if the one im working on now can crack 300wkw !
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
- Fast Driver
- Posts: 453
- Joined: Mon Mar 14, 2005 1:32 pm
- Vehicle: ND - 2 GT
- Location: Perth W.A.
Re: My latest BP 1.8 dyno results
Good job Wozzah, just need to put one of those motor in one of these kit car based on the mx5.
http://www.youtube.com/watch?v=wsCJMcg3s88
track
http://www.youtube.com/watch?v=GT1bygfy154
race series
http://www.youtube.com/watch?v=jvwve2HGWK0
http://www.youtube.com/watch?v=wsCJMcg3s88
track
http://www.youtube.com/watch?v=GT1bygfy154
race series
http://www.youtube.com/watch?v=jvwve2HGWK0
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 53 guests