My latest BP 1.8 dyno results

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
wozzah1975
Fast Driver
Posts: 336
Joined: Sun Oct 30, 2011 11:39 pm

My latest BP 1.8 dyno results

Postby wozzah1975 » Mon Apr 22, 2013 7:32 pm

Though I'd share this. One of the guys in my club liked my BP conversion so much he has done one himself, except this one is turbod :)

Basically, the engine is a BP 1.8. Internally it has forged rods and pistons (eagles and wiseco from memory), block done by himself, and is fitted with one of my std valve head and mild cam packages. It runs a Brae Fabrications Exhaust manifold with a TDO5 20G Turbo fitted. It has taken a little bit of getting to it's current state, but now it's a screamer.

260rwkw on 24lbs on a 7200rpm limiter to date. This is a video of one of the earlier runs on less boost.

https://www.facebook.com/photo.php?v=10 ... =2&theater

Cheers
Woz
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: My latest BP 1.8 dyno results

Postby manga_blue » Mon Apr 22, 2013 8:03 pm

So ... beware of white (or is it silver?) Escorts then! Couldn't you get the top 3rd of the curve a bit flatter? :D
’95 NA8

User avatar
MrRevhead
Racing Driver
Posts: 715
Joined: Mon Mar 26, 2012 2:40 pm
Vehicle: NA6
Location: NW Sydney

Re: My latest BP 1.8 dyno results

Postby MrRevhead » Mon Apr 22, 2013 8:06 pm

What a super clean MK2 Escort with power to boot to match! (although, I will always have a soft spot for MK1's after seeing Geoff Newton's Cosworth powered one in the 90's
)

I will be interested to hear what he pulls down the quarter if he does a run in the future.
Last edited by MrRevhead on Mon Apr 22, 2013 8:11 pm, edited 3 times in total.
1991 NA6 BRG Limited Edition #124 (Aus Delivered)
Image

User avatar
wozzah1975
Fast Driver
Posts: 336
Joined: Sun Oct 30, 2011 11:39 pm

Re: My latest BP 1.8 dyno results

Postby wozzah1975 » Mon Apr 22, 2013 8:07 pm

manga_blue wrote:So ... beware of white (or is it silver?) Escorts then! Couldn't you get the top 3rd of the curve a bit flatter? :D



Yes, beware! :) I'm not doing the tuning on this one, someone else is. It has been back since for a tidy up, and there are still some minor issues to sort I believe.

Cheers
Woz
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292

User avatar
wozzah1975
Fast Driver
Posts: 336
Joined: Sun Oct 30, 2011 11:39 pm

Re: My latest BP 1.8 dyno results

Postby wozzah1975 » Mon Apr 22, 2013 8:10 pm

wozzah1975 wrote:
manga_blue wrote:So ... beware of white (or is it silver?) Escorts then! Couldn't you get the top 3rd of the curve a bit flatter? :D



Yes, beware! :) I'm not doing the tuning on this one, someone else is. It has been back since for a tidy up, and there are still some minor issues to sort I believe.

Cheers
Woz


I think it's flatter now!! lol

Woz
BP DOHC Mk1 Escort race car. Big Valve head, Cosworth Cams, Spool Rods, Nissan Pistons
www.facebook.com/pages/Warren-Heath-Per ... 4779879292

User avatar
Eeyore
Driver
Posts: 88
Joined: Tue Apr 09, 2013 8:26 pm
Vehicle: Clubman
Location: Ipswich, QLD

Re: My latest BP 1.8 dyno results

Postby Eeyore » Tue Apr 23, 2013 6:57 pm

I'm looking to do a similar build with a new GTX2863R. I need to select the right cams for the job though. Aiming for 250rwkw.
Kurt
1971 1300 Estate Deluxe
1973 1300 Wagon
1979 RX7

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: My latest BP 1.8 dyno results

Postby NitroDann » Tue Apr 23, 2013 7:12 pm

Good job wozzah, see if the one im working on now can crack 300wkw ! :)

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

spikey
Fast Driver
Posts: 453
Joined: Mon Mar 14, 2005 1:32 pm
Vehicle: ND - 2 GT
Location: Perth W.A.

Re: My latest BP 1.8 dyno results

Postby spikey » Wed May 01, 2013 3:57 pm

Good job Wozzah, just need to put one of those motor in one of these kit car based on the mx5.
http://www.youtube.com/watch?v=wsCJMcg3s88

track
http://www.youtube.com/watch?v=GT1bygfy154

race series
http://www.youtube.com/watch?v=jvwve2HGWK0


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 51 guests